Table of Contents
FEATURES & FUNCTIONS
5
4
3
2
1
CONTROL PANEL
Use this panel to set the input signal
and functions. When the center of this
panel is pressed, this panel comes out.
STATUS DISPLAY
The status display indicates current
printer condition.
MEMORY BUTTON ( )
Press to memorize the image to be
printed. When signal is not inputted,
memory is not available.
PRINT BUTTON ( )
Press to print the image memorized by
the MEMORY button. When image is
not memorized, printing is not available.
POWER BUTTON ( )
Press to turn on and off the power.
Each time this button is pressed, ON/
OFF is switched.
MONITOR BUTTON (
Switches the display on the monitor.
When this button is pressed, the picture
on the monitor screen switches between
the picture of the input signal (source
image) and the memorized image.
FRONT PANEL
6
7
8
9
)
STATUS DISPLAY
10
11
12
13
14
DIMMER BUTTON (
This button controls the brightness of
the print outlet illumination that is lit on
the photo; the button also controls the
brightness of the print status indicator.
When this button is pushed and held,
the remaining amount of ink ribbon on
the status indicator display is reset.
MODE BUTTON (
Each time this button is pushed, the light
of the print outlet switches as follows:
turn-on...The light always illuminates.
turn-off...The light is always turned off.
blinking for 5 seconds...
The status changes according to
the printer status.
1. During printing:
2. After printed paper ejection: illuminates for 5 seconds
3. Occurence of error:
RIBBON CARTRIDGE LOADING
SLOT
A flap (cover) to protect inside of the
unit is attached.
RIBBON EJECT BUTTON ( )
Press to eject the ribbon cartridge.
15
16
17
18
)
)
blinking slowly
blinking rapidly
9
Table of Contents
