Table of Contents
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions
(see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the E model and "color"
will be displayed for all other models.
The notation used in this user's manual is "color".
* The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication alphabet
or the management number.
* The Illustration of external appearance is for 42" model.
Please acknowledge some differences in the actual product of other models.
USER'S MANUAL
WIDE PLASMA DISPLAY
P42VHA51W SERIES
P42HHA51W SERIES
P50XHA51W SERIES
P55XHA51W SERIES
P63XHA51W SERIES
Table of Contents
Related Manuals for Fujitsu Plasmavision P42VHA51W SERIES
Summary of Contents for Fujitsu Plasmavision P42VHA51W SERIES
- Page 1 USER’S MANUAL WIDE PLASMA DISPLAY P42VHA51W SERIES P42HHA51W SERIES P50XHA51W SERIES P55XHA51W SERIES P63XHA51W SERIES Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate "Safety Precautions"...
-
Page 2: Table Of Contents
CONTENTS INFORMATION ..............E-3 Sharpness ................E-17 Ambient Sensor ..............E-17 CHECKING ACCESSORIES ..........E-3 Picture Mode ............... E-18 INSTALLATION ...............E-4 Color Temp................. E-18 ATTACHING THE FERRITE CORES ........E-4 Picture Memory ..............E-18 PART NAMES AND FUNCTIONS ........E-5 ADJUSTING SCREEN POSITION AND SIZE ....E-19 DISPLAY SECTION –... -
Page 3: Information
INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. •... -
Page 4: Installation
INSTALLATION • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. • Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. -
Page 5: Part Names And Functions
PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Input mode selection button Switches the input modes (Video mode and RGB mode). Volume button Adjusts the sound volume. Wide screen selection button Switches the screen over to a desired wide screen. Power indicator lamp This lamp shows the state of the power supply. -
Page 6: Display Section - Bottom
PART NAMES AND FUNCTIONS (Continued) DISPLAY SECTION – BOTTOM / I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. -
Page 7: Description Of Input Terminals
DESCRIPTION OF INPUT TERMINALS mD-sub input terminal Pin No. Input signal Pin No. Input signal (RGB1 INPUT/mD-sub) — Green Ground Blue — — — Ground Horizontal synchronization Ground Vertical synchronization Ground — Ground Frame Ground RS-232C terminal (RS-232C) Pin No. Signal DCD (Data Carrier Detect) RD (Received Data) -
Page 8: Remote Control
PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page button E-11 Switches between Power On and Standby. (MUTE button) E-11 Press to temporarily mute the audio. To return the audio to normal, press this button once again, or press the does the work also. -
Page 9: Using The Remote Control
USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards (2) Place two AA batteries in the remote (3) Close the cover until it snaps into place. while pressing it down. control. Make sure that the batteries are properly oriented. -
Page 10: Connecting The Display To External Equipment
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT DVD RECORDER/PLAYER, SATELLITE TUNER • Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input terminal. • If the equipment to be connected is equipped with HDMI output terminal and component video output terminal, it is recommended to connect to one side or the other. -
Page 11: Basic Operations
BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY Press /I to the left at the bottom of the display to the ON state. The power lamp lights up. Press on the remote control. The color of the power lamp changes from “Red” to “Green”. Press –... -
Page 12: Rgb Input Mode
BASIC OPERATIONS (Continued) RGB INPUT MODE Press to select the input mode. You can select RGB1. • RGB1: mD-sub * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-22. RGB1 mode * You can also use the buttons on the display’s control panel to perform these steps. -
Page 13: Watching Pictures On The Wide Screen
WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES Press The currently selected mode will appear. Press to select a desired Screen Size. Normal mode Each time you press , a different Screen Size appears. The sequences used are as follows: When you are in a Video input mode ormal Wide1 Wide2 Zoom1 Zoom2... -
Page 14: Screen Size
WATCHING PICTURES ON THE WIDE SCREEN (Continued) SCREEN SIZE Normal (Video/RGB) Displays pictures of normal size (i.e., a 4:3 aspect ratio). Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen. Picture of Wide1 standard size Wide2 (Video)/Wide (RGB) Ideal for displaying vertically extended pictures such as squeezed pictures. -
Page 15: Adjustment Menu
ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. PICTURE (E-16) Signal Contrast (E-17) MENU Drive Contrast (E-17) Brightness (E-17) Color (E-17) Tint (E-17) Sharpness (E-17) Ambient Sensor (E-17) Picture Mode (E-18) Color Temp. (E-18) Picture Memory (E-18) Default POSITION/SIZE... -
Page 16: Basic Procedure Of Adjustment Menu
BASIC PROCEDURE OF ADJUSTMENT MENU • Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint)) Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.) Press The main menu screen will appear. -
Page 17: Adjusting The Picture
ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU on page E-16 for the basic procedures. Signal Contrast Press to increase the input signal contrast. Press to reduce the input signal contrast. Press to store. -
Page 18: Picture Mode
ADJUSTING THE PICTURE (Continued) Picture Mode Each time you press , the available choices appear in the following sequence. Natural Fine Effective Conventional Still Enables you to watch pictures with natural color tones and high picture clarity. This mode is suitable for watching movies or TV. Natural Best for watching movies in darkened rooms. -
Page 19: Adjusting Screen Position And Size
ADJUSTING SCREEN POSITION AND SIZE • You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page E-16 for the basic procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. -
Page 20: Adjusting Audio
ADJUSTING AUDIO • You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-16 for the basic procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. -
Page 21: Other Adjustments
OTHER ADJUSTMENTS FEATURES setup screen has the following 4 options. See Page E-16 for the basic procedures. [Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. [On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-21.) [Input Terminal]: Can make an input terminal setting such as Video Input. -
Page 22: Name Selection (Name Select
OTHER ADJUSTMENTS (Continued) Name Selection (Name Select) You can change the settings for indications for video inputs and RGB inputs. Video input You can change the settings for indications for the VIDEO inputs. Select the desired indication in accordance with the connected equipment. Each time is pressed, the setting is switched. -
Page 23: Other Settings
OTHER SETTINGS Auto Off-NO SIG. You can make to the standby state automatically when the no signal state continued during set up time. Press to select the “Time”. Press to select the amount of time before the standby state starts. 1 min. -
Page 24: Direct Setting
OTHER ADJUSTMENTS (Continued) Min. Std. Max. [Min.]: Pattern moves in small range. (About 5 pixels) [Std.]: Pattern moves in moderate range. (About 10 pixels) [Max.]: Pattern moves in wide range. (About 15 pixels) (6) Press to store. * When the Screen Orbiter function is operated, some screen contents at the top, bottom, right or left of the screen may move offscreen. -
Page 25: Initialization Of User Adjustment Value
INITIALIZATION OF USER ADJUSTMENT VALUE You can restore the values of the adjustment/setting made in the MENU to factory settings. Press The main menu screen will appear. Press to select “FACTORY DEFAULT”. Each time you press , one of the available menus appears in the following sequence: “FACTORY DEFAULT”... -
Page 26: Options
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION This display (P42VHA51/P42HHA51/P50XHA51) is for use only with Fujitsu General Limited’s option (P-WB4201, P-CT4200, P-TT4202). This display (P55XHA51) is for use only with Fujitsu General Limited’s option (P-WB6300, P-CT6300, P-TT4202). -
Page 27: Main Supported Signals
MAIN SUPPORTED SIGNALS The plasma display can store up to four types of signals for RGB adjustment values. The plasma display uses the first-in, first-out method; therefore, the first input signal is cleared when the fifth one is input. Input the signal you want to store and adjust to a desired screen according to “ADJUSTING SCREEN POSITION AND SIZE”. When the adjustment has been made, it is automatically stored. -
Page 28: Specifications
SPECIFICATIONS WIDE PLASMA DISPLAY Series Name P42VHA51W P42HHA51W Model Product Name P42VHA51WS P42HHA51WS Screen size 42” wide screen: 42” wide screen: 92.1 cm (W) x 51.8 cm (H) 92.2 cm (W) x 52.2 cm (H) (105.7 cm diagonal) (106.0 cm diagonal) 36.3 inch (W) x 20.4 inch (H) 36.3 inch (W) x 20.6 inch (H) (41.6 inch diagonal) - Page 29 / at least 2.4 m or 7.9 feet for 63 ) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. E-29...
-
Page 30: Cleaning And Maintenance
CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control.