Connection Connect to a network When using wired connection, connect the TV and a router with a LAN cable. When using wireless connection, you need to set the Network Setup in the Initial Setup Wizard (on step 6).
Page 3
Connect the Cable/Satellite Use one of the connection cables illustrated below. Then, place the IR Blaster near the remote sensor of the Cable/Satellite Box. Place the IR Blaster so that the infrared transmitter points to the remote sensor of cabe ..
• When you skip the Network Setup, only limited functions will be available with the TV. • The screen may stay dark for several seconds after the Sony logo disappears. Wait for a while until the Initial Setup Wizard is displayed.
Page 6
Keypad * You cad use the scroll, zoom, and drag and drop operationsonly when you are launching compatibleapplicationsorbrowsing web sites. A!_:_P A MP* Allows you to control the connected AV Receiver. Keys beside orange markers are active when the AMP indicator is on. I/{:.
Before connecting with a Wireless LAN • From a PC browser Access the following: Check the following to ensure that the Wireless LAN connection can be made. http:llesupport.sony ,comlinternettvlhelpguidel • Depending on the surrounding environment, such as the wall material, radio wave...
Frequently-asked questions (FAQ) There is no picture (screen is dark). • Make sure that the Power indicator is lit up green. • If the Power indicator and Timer indicator on the front side are flashing, check the condition of the TV by examining how the Power indicator and Timer indicator on the front side are flashing (numbers of flashes).
Timer indicator Green: Picture off * The TV turns into standby mode when Orange: Timer you press this button to turn off the TV. Sony Customer Support www.sony.com!internettvsupport United States 1.800.222.SONY Please Do Not Return the Product to the Store...