Table of Contents
Quick Links
SHARP
AQUOS
LC-70LE640U
LC-60LE640U
LC-52LE640U
LC-70C
LC-
LC-52C
:: :i_¸¸
U
U
U
LIQUID CRYSTALTELEVISION
Ti_L_:VISEL
TELEVIS
DE
MODE
MANI
1.41 rl-Ilil
TM
DIVX+
.........................
H D
_
SmartCentra ...._°o..,.,°,,
IMPORTANT
: Please read this operation
manual before starting
operating
the equipment.
IMPORTANT
: Veuillez lire ce mode d'emploi
avant de commencer
b. utiliser I'appareil.
IMPORTANTE
: Lea este manual de operaci6n
antes de comenzar
a operar el equipo.
Chapters
Table of Contents
Related Manuals for Sharp AQUOS LC-60C6400U
Summary of Contents for Sharp AQUOS LC-60C6400U
- Page 1 SHARP :: :i_¸¸ AQUOS LC-70LE640U LC-70C LC-60LE640U LC-52LE640U LC-52C LIQUID CRYSTALTELEVISION Ti_L_:VISEL TELEVIS MODE MANI 1.41 rl-Ilil DIVX+ ......SmartCentra .._°o..,.,°,, IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer b.
- Page 2 LC-70 LC-70C6400U LC-60C6400U LC-52C6400U LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear and right side of the TV. IMPORTANT INFORMATION WARNING:...
- Page 3 DECLARATION OF CONFORMITY: SHARP LiQUiD CRYSTAL TELEViSiON, MODEL LC-70LE640U/LC-60LE640U/LC-52LE640U/ LC-70C6400U/LC-60C6400U/LC-52C6400U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 4: Dear Sharp Customer
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the important Safety instructions carefully before using this product. iMPORTANT SAFETY iNSTRUCTiONS... -
Page 5: Important Safety Instructions
iMPORTANT SAFETY iNSTRUCTiONS EXAMPLE OF ANTENNA GROUNDING AS PER Outdoor Antenna Grounding - If an outside antenna is NATIONAL ELECTRICAL CODE ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges. - Page 6 If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP ordering, or VISIT http://www.sharpusa.com/SharpDirect.
-
Page 7: Table Of Contents
Contents iMPORTANT iNFORMATiON ......Enjoying Photo/Music/Video Playback DEAR SHARP CUSTOMER ........Connecting a USB Memory Device/ iMPORTANT SAFETY iNSTRUCTiONS ..... 3=5 USB Hard Drive ..........Connecting a Home Network (DLNA) Server ..40 Supplied Accessories ..........Selecting the Folders to Play Back ....41... -
Page 8: Supplied Accessories
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery Stand unit Operation manual Connection guide (x 1) Page 8 (x 2) Page 9 (x 1) Page 7 (x 1) (x 1) ,., .. -
Page 9: Tv (Rear/Side)
TV, or operate the remote control unit closer to the remote control sensor. iMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. -
Page 10: Using The Remote Control Unit
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. -
Page 11: Front/Rear/Side View
Part Names OPC sensor * Remote control sensor Center Icon illumination (See page 32.) * OPC: Optical Picture Control (See page 26.) RS-232C terminal OWER __-- PC IN terminal button MENU R-AUDIO-L VIDEO button _-_'_.,_ terminals _ I:IT INPUT terminals button R-AUDIO-L _-'a... - Page 12 Part Names POWER: Switch the TV power on or enter standby. (See page 17.) TV, STB, DVDoVOR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 47 to 48 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD.VCR or AUDIO) and DISPLAY at the same time.
-
Page 13: Introduction To Connections
introduction to Connections For connecting the TV to external equipment, use commercially available cables. . The illustrations of the terminals are for explanation purposes and may vary slightlyfrom the actual products. m Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images. - Page 14 Connecting to E×ternal Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.) For connecting the TV to external equipment, use commercially available cables.
-
Page 15: Hd Cable/Satellite Set-Top Box
Connecting to Externa( Equipment When using Component cable (COMPONENT}: _:_\ Audio _le Y (Green) PB(Blue) Component video cable To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output. See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal. -
Page 16: Connecting To External Equipment
Connecting to External E quipment When connecting an AV amplifier for surround system HD Cable/Satelliteset-top box HDMI-certified cable "1 Optical fiber cable *2 Letting the TV output the audio to an AV amplifier: "1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable. -
Page 17: Connecting A Pc
Connecting to E×ternal E quipment Refer topage 54foralistofPC signals compatible with the TV. When using HDMI cable (HDMI 1 2, 3 or 4): HDMI-certified cable Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a ©... -
Page 18: Watching Tv
Watching TV When you turn on the TV for the first time, it will mPOWER automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. - Page 19 Watching Antenna & Cable/STB Press A/V to select the time zone where you are using the TV, and then press ENTER. Select the type of connection you will use to watch T_. Example Press 4/_ to select "Antenna & Cable" or "Set- top box", and then press ENTER.
- Page 20 Watching TV OH Search (Channel search) Completed Channel auto search makes the TV look for all The settings confirmation screen is displayed. channels viewable in the set area. Confirm the information displayed on the screen, When "Air" is selected in Antenna setting: and then press ENTER.
-
Page 21: Direct Button Operation
Direct Button Operation OREC EC3 CC3 CZ3 CZ3 You can change the volume by pressing VOL+/- OPTION SLEEP AUDIO FREEZE the TV or on the remote control unit. = To increasethe volume, pressVOL +. = To decrease the volume, press VOL-. Central Smart Audio status... -
Page 22: Netflix
Direct Button Operation AUTO: Optimizes the image quality automatically based on the room brightness and image signal. Press FLASHBACK to switch to the previously tuned STANDARD: For a highly defined image in a normal channel or previous input mode. lighting. o PressFLASHBACK again to switch back to the currently tuned channel. -
Page 23: Audio
Direct Button Operation 1 Press CC. Digital broadcasting audio mode The types of audio transmitted in a digital broadcast include • This will present the Closed Caption information display. SURROUND as well as MONO and STEREO. In addition, it 2 Press CC while the Closed Caption information is is possible for multiple audio tracks to accompany a single still on the screen. -
Page 24: View Mode
DirectButtonOperation You can select the screen size. AVMODE VIEWMODEFLASHBACK 1 Press VIEW MODE. o The View Mode menu displays. . The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. -
Page 25: On=Screen Display Menu
LCFONT: This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy- to-read characters on LCD screens. Using the remote control Using the control panel of the main unit... -
Page 26: Picture Settings
On=Screen D isplay Menu o When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. o Some menu items may not be displayed depending on the selected input source. AQUOS LINK Setup ...... -
Page 27: Av Mode (Changing Pic.quality)
On=Screen Display Menu The audio and video settings can be changed to suit Adjusts the picture to your preference with the the program or input content being watched. following picture settings. Select from the following AV modes. Example When the input source is TV, COMPONENT, VIDEO 1 or 2: AVMODE VIEWMODE FLASHBACK AUTO/STAN DARD/MOVI E /GAME/USER/DYNAMIC/... -
Page 28: Motion Enhancement
On=Screen Display Menu Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates For a better white balance, use color temperature correction. High: White with bluish tone each still film frame for high-definition picture quality. Advanced: Adjust effect to reduce judder from film Middle: contents. -
Page 29: Auto Volume
On=Screen Display Menu Different sound sources sometimes do not have the You can adjust the sound quality to your preference same loudness level, such as a program and its with the following settings. commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing Example levels. -
Page 30: Audio Only
On=Screen Display Menu ," This function allows you to set the Power Saving level Power control setting allows 'ou to save energy. in order to decrease the power consumption increase the backlight lifespan. Standard: Optimizes power reduction based upon video content. -
Page 31: Apps
On=Screen D isplay Menu i_ii_i_i_ii_!_!_!_lllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll:_!i_ii_ii ¸illIlill__llil_ ..Allows you to capture and freeze a moving image that Example you are watching. You can select Freeze by pressing FREEZE on the remote control unit. See page 20 for details of Freeze function. Allows you to change the audio when multiple audio is available for the program you are watching. -
Page 32: Hdmi Setup
On=Screen Display Menu To watch an HDMI or PC IN equipment image, select For adjusting a picture's horizontal and vertical "HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the position. INPUT list using INPUT on the remote control unit or H=Pos.: Centers the image by moving it to the left or on the TV. -
Page 33: Operation Lock Out
On=Screen Display Menu You can select the image from several types of demo This function locks the operation buttons on the TV mode. and the remote control. Off: No adjustment. LC-70LE640U/LC-60LE640U/LC-52LE640U RC Control Lock: All buttons on the remote control are SmartCentral/Feature Derno/Auto Play... -
Page 34: Initial Setup Ez Setup
On=Screen Display Menu Antenna & Cable/STB: Select the type of connection you will use to watch TV. Air/Cable: Make sure what kind of connection is made Example with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. -
Page 35: Favorite Ch
On=Screen Display Menu If complex adjustments are made and the settings This function allows you to program 4 favorite cannot be restored to normal, you can reset the channels, in 4 different categories. By setting settings to the factory preset values. favorite channels in advance, you can select your... - Page 36 On=Screen D isplayMenu TV Parental Guidelines V-CHIP is an electronic filtering device built into your Example TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
-
Page 37: Parental Ctrl
On=Screen Display Menu [] Canadian French Ratings Canadian Rating Systems (Canadian English ratings and Canadian French ratings) Example o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. -
Page 38: O Information Identification
On=Screen Display Menu 2 Press A/T to select "Software Update", and then press ENTER. Example = Ifyou havealreadyset the Secret No., go to step 3. Example Smart Central 3 Input the 4-digit secret number by using 0-9. 1 Press MENU to display the MENU screen, and then press _1/_ to select "Information". - Page 39 When a server connection cannot be established or an update is not available, a message is displayed. have any questions, please If a server connection cannot be established, check the call 1-800-BE-SHARP (800-237-4277). broadband connection and Intemet Setup. • Do not remove...
- Page 40 On=Screen Display Menu 3 Press ENTER to start checking the data in the USB 5 To update the TV software with the update file, memory device. select "Yes", and then press ENTER. 4 During the data checking, "Checking" blinks. Example The current version of the TV software and the version of the update file on the USB memory device are displayed.
-
Page 41: Enjoying Photo/Music/Video Playback
Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. o Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. - Page 42 Enjoying Photo/Music/Video Playback USB device USB Memory, USB card reader (Mass Storage class), USB hard drive Smart Central File system FAT/FAT32/NTFS (USB hard drive only) Photo file JPEG (jpg) (DOF2.0 compliant) format Music file MP3 (.mp3) format Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1 k, 48kHz...
- Page 43 Enjoying Photo/Music/Video Playback The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation 41/_" Go to the previous/next photo in the same directory. Example RETURN Return to the thumbnail selection screen. A (red} Rotate the photo by 90 degrees to the left, B (green} Rotate the photo by 90 degrees to the right, o Rotating photos only applies to the temporarily selected...
- Page 44 Enjoying Photo/Music/Video Playback Smart Central Example AQUOS On the menu to be displayed in USB mode, This screen image is for the USB mode. It may be slightly to select an item and make settings to your different in the Home network (DLNA) mode. preferences.
- Page 45 Enjoying Photo/Music/Video Playback Buttons for playing mode ipt! Example Go to the beginning of a file by pressing A once and the previous file by pressing A twice, Go to the next file. USB mode: The fast forward speed changes every time you press I_.
-
Page 46: Usb Operation Panel
Enjoying Photo/Music/Video Playback m Using the operation panel Buttons for using the Home Network (DLNA} )anel You can use the operation panel for video playback operation operations. Starts playback. You can call up this operation panel by pressing Go to the beginning of a file by pressing once MENU after you press A/T to select "USB Operation or to the previous file by pressing twice,... -
Page 47: Divxce Setup
Enjoying Photo/Music/Video Playback This is the function to confirm your registration code. You need to recister the code at http://www.divx.com. Smart Central CD O Press MENU to display the menu screen. Press _/1_ to select "Initial Setup", and then press ENTER. -
Page 48: Other Viewing Options
Other Viewing Options You can operate the connected AV products (AV To operate the connected equipment, press STB, receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, DVD+VOR or AUDIO to select your device. (STB LD) using the presetting manufacturer function of your (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) remote control unit. - Page 49 04, 05, 06 05, 08, 13, 15, 16, QUASAR 19, 22, 23 REALiSTiC 01,02 ZENITH SAMSUNG 11,12 SHARP 01,02, 03 SONY 07, 08, 15 • Numbers marked with * are SAT codes, all others are STB SYLVANIA 04, 05, 06 codes. TATUNG...
-
Page 50: Using Aquos Link
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. -
Page 51: Aquos Link Setup
Using AQUOS LiNK This function can be set for each input terminal. Example The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of the connected AQUOS LINK-compatible recorder. Off: This function does not work. - Page 52 Using AQUOS LiNK Smart Central This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINK- compatible equipment with a recording function simply pressing OPEC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording.
-
Page 53: Link Operation Menu
Using AQUOS LiNK You can manually turn on/off the power of the You can call up the AQUOS LINK-compatible connected AQUOS LINK-compatible equipment. recorder's EPG and preset timer recordings using the TV's remote control. Each time you press ENTER, the connected equipment switches on or off. -
Page 54: Using A Pc
Using a PC You can select the screen size. Press VIEW MODE. o The View Mode menu displays. The menu lists the View Mode options seleetable for the type of video signal currently being received, Press VIEW MODE or &/T while the View Mode menu is displayed to select... -
Page 55: Pc Input
Using a PC Example Smart This function sets the terminal to output the computer Central audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. - Page 56 Using a PC • The TV can be controlled from a PC, control panels [] Communication conditions for RS=2320 and other devices using the RS-232C or IP. Set the RS-232C communication settings on the PC to Use a cross-type RS-232C cable, ETHERNET cable match the TV's communication conditions.
- Page 57 Using a PC [] Command table • Commands not indicated here are not guaranteedto operate. CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER The Power On command rejected. POWERONOOMMANDSETIING RiSiPiW The Power On command accepted. Or,[RS 2320] On [IP] The Power On command accepted.
-
Page 58: Using The Internet
Using the Internet By connecting your TV to a broadband system, you can access the Intemet from the TV. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. (See page 59.) ,, You can enjoy a variety of streaming content and Intemet applications. (See page 64.) ,, To connect your TV to the Intemet, you must have a broadband Intemet connection. -
Page 59: Internet Setup
Using the Intemet Press A/V to select "Push button", and then press ENTER. o To configure the setting via PC, select "PIN code". Example Follow the on-screen instructions and the operation manual of the access point to configure the settings. Select "Next"... -
Page 60: Aquos Advantage Live
Using the Internet Smart Central This function can be used to display up-to-date information and allow you to receive support service over the network. Press AAL. You can also display the AQUOS ADVANTAGE LIVE screen by pressing FAY APP on the remote control unit. - Page 61 Using the Intemet Caps Off/Caps On/Caps Lock If "alphabet" is selected in "Character Set", this switches characters between uppercase and lowercase. When you are editing an input screen or specifying the Each time you press ENTER, the character type switches as Ethernet settings used for accessing the Internet, enter shown below: text from the software keyboard.
- Page 62 Using the Internet About links Smart Central • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them.
- Page 63 Usingthe Interact You can use the toolbar to control the browser and to Adding a web page to your bookmarks allows you to specify settings. return to that page later by simply selecting it from your list of bookmarks. Smart Central 1 Display the page that you want to bookmark.
- Page 64 Using the Interact You can check or modify your browser settings from Security: the Browser menu. Save Setting: If you select this option, a message is displayed when you move from a protected page to an The Browser menu includes a display settings menu unprotected page.
-
Page 65: Software Update
Using the Internet Example By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. Smart Please check that the most current software is Central loaded on TV by selecting "Auto Update Setting" on "Software Update"... - Page 66 Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
-
Page 67: Appendix
Appendix • Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. LC=70LE640U/LC=60LE640U/LC=70C6400U/LC=60C6400U Unfasten the four screws used to secure the stand in Detach the stand from the TV. - Page 68 Appendix This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP}. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. = Installing the TV requires special skirl that should...
- Page 69 Appendix Problem Possible Solution o No power o Check if you pressed POWER on the remote control unit. _, Page 17 o Is the AC cord disconnected? ,,_Page 8 o Has the power been turned on? • Page 17 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation.
-
Page 70: Audio Settings
Appendix Problem Possible Solution o No picture o Is connection to other components correct? =_ Pages 12 to 16 and 49 o Is the correct input selected? =_ Pages 12 and 20 o Is "On" selected in "Audio Only"? • Page 29 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. -
Page 71: Trademarks
As a precautionary measure, make a note of your secret number above, and keep it in a safe place. Trademarks SmartCentral is a registered trademark of Sharp Corporation. Products that have earned the ENERGY STAR _> are designed to protect the environment through superior energy efficiency. -
Page 72: Specifications
Emergency alert messages via Cable are unreceivable. *2 The dimensional drawings are shown on the inside back cover. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production... - Page 73 This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from station of the same kind, and may not cause harmful interference to systems operating on a primary basis. CONTAINS TRANSMITTER MODULE COFETEL ID: RCPSHTW11-1252 Brand: SHARP Model: TWFM-B005D Specification Standard IEEE 802.11 a/b/g/n...
-
Page 74: Information On The Software License For This Product
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. - Page 75 information on the Software License for This Product libfreetype Copyright © 2006, 2007, 2008, 2009, 2010 by David Turner, Robert Wilhelm, and Werner Lemberg. cURL Copyright © 1996-2010, Daniel Stenberg, ([email protected]) libxml2 Copyright © 1998-2003 Daniel Veillard. All Rights Reserved. Copyright ©...
-
Page 76: Calling For Service
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP. LiMiTED WARRANTY CONSUMER LiMiTED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the "Product"),... - Page 77 (including lost profits or damages for loss of time or loss of use or loss of data) arising from or in any connec- tion with the use or performance of a Product or a failure of a Product, even if Sharp is aware of or has been advised of the possibility of such damages;...
-
Page 78: Dimensional Drawings
Dimensional Drawings Unit: inch (mm) LC-70LE640U/LC-70C6400U 1/64 (51)'2 Unite: pouce (mm) 3v2/80/ Unidad: pulgada (mm) 5 23/64 (136) 21 7/64 (536) 15 S/ (400) Ij__ 5 25/6 (137) AN=52AG4 LC-60LE640U/LC-60C6400U 1 7/64 (27.9) _2 54 17/32 (1385) 2_2 sg/e4 (74) k _17,6_/538/ 4 17/32 6 21/32 J... - Page 79 Dimensional Drawings Unit: inch (mm) LC-52LE640U/LC-52C6400U 1 3/64 (26.4) _2 Unite: pouce (mm) Unidad: pulgada (mm) 47 9/16 (1208) /32 (72) 5 41/64 21 7/64 (536) __ 5° • ........j, i 4 1/2 617/6 41 (114) AN-52AG4 Active area/A,rea activa/Zone active 2 Thinnest part/Parte mb.s delgada/Partie la plus mince...
- Page 80 $HARR SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-F419WJZZ 12P01-MX-NM...