Table of Contents
Update the parameter for the image recognition library
The parameter file needed for the image recognition library (intrusion detection, congestion detection) is trans-
ferred from the PC to the BOX (updating). Unified file format is used for parameters to be updated in each
library, and the same procedure can be performed in all the libraries.
For parameter change for image recognition, go to "parameter setting application".
Step 1
Select "2.Settings" on the BOX configuration page
(+ page 17).
→ The setup window will be displayed.
→
Step 2
Select "4.Parameter update".
→ The parameter update window will be displayed.
→
Step 3
Click the [Browse] button, and select the parameter
file (box.tar.gz) to be updated. Click the [Upload] but-
ton after selecting the file.
→ The update success and reboot window will be
→
displayed.
Step 4
Click the [reboot] button. The success window will be
displayed when the reboot is successful.
When a file with a format other than the prescribed
format, " box.tar.gz", is transferred, the update failure
window is displayed.
However, if parameters that are different from the
ones in the library on the BOX are updated, the image
recognition processing stops. In such a case, updat-
ing appropriate parameters restarts the image recog-
nition processing.
22
Table of Contents
