Installation Of The Range; In Thecommonwealth Ofmassachusetts - GE XL44 J2B915 Owner's Manual And Installation Instructions

Xl44 self-cleaning dual fuel convection
Table of Contents
Installation of the range.
Read these instructions
completely
and carefully.
IN THECOMMONWEALTH OFMASSACHUSETTS
This
product
must
be
installed
by a licensed
phunber
or gas
fitter.
When
using
ball
type
gas shut-off
wdves,
they
shall
be the
T-handle
type.
A flexible
gas
connector,
when
used,
must
not
exceed
3 feet.
BEFORE Y OUBEGIN
Installation of this range must conform with local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. This range has been
design-certified
by CSA International according to ANSI Z21.1, latest edition.
_s Mth any appliance
using gas and generating
heat, there are certain
sal_'ty precautions
you
should
tollow. Ybu will find these precautions
in
the Important Safetg Information
secOon in the
front of this mmmal.
Read them
carefully.
IMPORTANT'. OBSERVE A LLGOVERNING CODES
AND ORDINANCES.
NOTE"This appliancemust be properly grounded
IMPORTANT'.Save these instructions for the locale/ecttical
lbspector# use.
/VOTE TO INSTALLER: Leave these instructions with the
applianceafter installation is completed
/VOTE TO CONSUMER: Keep this Owner# Manual and
Installation Instructions for future use.
SERVICER:Theelectrical diagram is in an envelopeattached
to the back of the range.
FOR YOUR SAFETY
Do not store or use combustible
materials,
gasoline
or other flammable
vapors and liquids in the
vicinity
of this or any other appliance.
If you smell gas:
[]
Open
windows.
]
Don't
touch
electrical
switches.
[]
Extinguish
any open
flame.
[]
hmnediatelv
call yore', _,*as, supplie_:
ELECTRICAL
REOUIREMENTS
CAUTION:
FOR PERSONAL SAFETY,
DONOTUSE AN EXTENSION CORD WITHTHIS
APPLIANCE. REMOVE H OUSE FUSE OROPEN CIRCUIT
BREAKER BEFORE BEGINNING I NSTALLATION
This appliance
must be supplied
with the proper
voltage
and fl'equenc)',
and cmmected
to an
individual,
properly
grounded
branch
drcuit,
protected
by a circuit breaker
or time-delay
fllse,
as noted on the rating plate.
Wiringmustconformto National E lectncCodes.
If the electric
setMce provided
does not meet
the
above specifications,
have a licensed
electrician
install an approved
outlet.
Because
range temfinals
are not accessible
after
range is in position,
flexfl)le service conduit
or cord
must be used.
38
Table of Contents
loading

This manual is also suitable for:

J2b915

Table of Contents