Laundry
Center
Dryer
Operating
Instructions
OFF
40
50
AUTOMATIC
PRESS SAVER
TI_II[D DBY
Before
Operating
Your Dryer
Readyour
Owner's Guide. It has important safety
and warranty information. It also has many suggestions
for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETYINSTRUCTIONSin your owner's guide before
operating this appliance.
Operating
Steps
Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that tint screen is clean and in place.
3, Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Drying Temperatures
control
6. Turn
cycle
selector
clockwise
to desired
setting.
7. Start dryer. Turn the Turn to Start control clockwise
to ON. Hold for I-2 seconds and release.
8. A signal will sound
when
the cycle ends.
9. Remove
items immediately
and hang orfold.
10. Clean lint screen
after every load.
Temperature
Selection
Always
follow
directions
on fabric
care
labels.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff cycle only.
The REGULAR/WHITES-HIGH HEA T, PERM PRESS/
COLORS-MEDIUM HEA T, and DELICA TES-MEDIUM
LOW HEAT and KNITS-LOW HEAT temperature
settings may be used with any cycle setting.
Cyde Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically
turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Printed in U.S.A.
P/N 134808900(0611)