Managing Passwords - HP StorageWorks MSA 2/8 - SAN Switch User Manual
Hp storageworks secure fabric os v1.0 user guide (aa-ru57a-te, june 2003)
Hide thumbs
Also See for StorageWorks MSA 2/8 - SAN Switch:
- Reference manual (982 pages) ,
- User manual (270 pages) ,
- Installation manual (72 pages)
Table of Contents
Managing Secure Fabric OS
Managing Passwords
When Secure Mode is enabled, the following conditions apply:
The User account remains available fabric-wide regardless of whether Secure
Mode is enabled. The characteristics of the different accounts when Secure Mode
is enabled and disabled are described in
If a digital certificate is installed, the sectelnet, API, and HTTP passwords are
automatically encrypted, regardless of whether Secure Mode is enabled.
Note:
require significant effort and result in fabric downtime.
For information about recovering lost passwords, refer to the
Operating System Procedures Version 3.1.x/4.1.x User Guide
This section provides the following information:
94
The passwd command can be entered only on the Primary FCS switch.
The Root and Factory accounts can be accessed only from the FCS switches
(attempting to use them from a Non-FCS switch generates an error message).
The Admin account remains available from all switches, but two passwords
are implemented—one for all FCS switches and one for all Non-FCS
switches.
You can create and remove temporary passwords for specific switches,
allowing you to provide temporary access to another user.
Record and store the passwords in a secure place; recovering passwords may
Modifying Passwords in Secure
—
Modifying the FCS Switch Passwords or the Fabric-wide User
page 96
—
Modifying the Non-FCS Switch Admin
Using Temporary
Passwords, page 97
—
Creating a Temporary Password for a
—
Removing a Temporary Password from a
Table
16.
Mode, page 96
Password, page 97
Switch, page 98
Switch, page 99
Secure Fabric OS Version 1.0 User Guide
HP StorageWorks Fabric
.
Password,
Table of Contents
