Software Functions and Settings
The function level of the GT-1000 is B2. The table below lists the
functions and settings that can be controlled with software
commands.
Function
Output resolution
Zoom
Reading area
Data format
Color mode
Brightness
Halftoning mode
Gamma correction
Software Defaults
With the DIP switches at the preset factory settings, the following
values are the default values on the GT-1000 when the power is
turned on.
Function
Data format
Resolution
Zoom
Reading area
Color mode
Brightness
Gamma correction
Halftoning mode
Available settings
3 settings (50, 100, 200 dpi)
50% to 200% in 10% increments
592
840 dots at 200 dpi, 100%
1 to 8 bits per pixel per color
color (page sequence),
monochrome (standard and with dropout color)
7 levels
3 modes
5 settings
Command
Default value
ESC D
i=01
ESC R
n1=100, n2=100 (dpi)
ESC H
i1=100, i2=100 (%)
ESC A
n1=0, n2=0, n3=296, n4=420 (dot)
ESC C
i=00
ESC L
BRIGHTNESS dial setting
ESC Z
i=01
ESC B
i=00
Scanner Model Technical Data
(1 bit/pixel/color)
H
(monochrome)
H
(CRT Display A)
H
(Halftoning Mode A)
H
B-3