Table of Contents
Quick Links
Operator's
Manual
j CRRFTSMRH°j
evolv M
3.6 Volt SCREWDRIVER
Model No. 320.17088
WARNING:
To reduce
the risk of
injury, the user must read and
understand
the Operator's
Manual
before
using this product.
0Q0s
CHARGE
BATTERY
BEFORE FIRST USE
• WARRANTY
SAFETY
ASSEMBLY
OPERATION
MAINTENANCE
Sears Brands
Management
Corporation
www.craftsman.com
Table of Contents
Related Manuals for Craftsman evolv 320.17088
Summary of Contents for Craftsman evolv 320.17088
- Page 1 Model No. 320.17088 0Q0s CHARGE BATTERY BEFORE FIRST USE • WARRANTY WARNING: To reduce the risk of SAFETY injury, the user must read and ASSEMBLY understand the Operator's Manual OPERATION before using this product. MAINTENANCE Sears Brands Management Corporation www.craftsman.com...
- Page 2 IfthisCraftsman@ Evolv toolfailsto givecomplete s atisfaction within oneyearfromthedateofpurchase, return itto anySears s tore or other Craftsman@ E volv outlet i ntheUnited States forfreereplacement. Thiswarranty i svoidifthisproduct i s ever u sed forcommercial or rental purposes. Thiswarranty g ives youspecific legal r ights, andyoumay alsohave other rights, w hich varyfromstate to state.
- Page 3 We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Stores or other Craftsman outlets. Always use eye protection that is marked to comply with ANSI Z87.1...
- Page 4 WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. WARNING: Do not attempt to operate this tool until you have thoroughly read all instructions, safety rules, and warnings.
- Page 5 PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Dress properly.
- Page 6 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 7 SPECiFiC SAFETY RULES FOR SCREWDRIVER WARNING: To avoid injury, hold the tool by the insulated gripping surfaces only. if the tool contacts hidden wiring or its own cord, exposed metal parts of the tool could shock the operator and cause serious injury. Make sure that hidden electrical wiring, water pipes, or other hazards are not in the cutting path.
- Page 8 burst, causing personal injury or damage. Do not use Power unit outdoors or expose to wet or damp conditions. Water entering charger will increase the risk of electric shock. Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock...
- Page 9 at Sears Service Center when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Disconnect power unit from the power supply when not in use.. This will help prevent damage to the power unit during a power surge. Risk of electric shock.
- Page 10 (refer to "PARTS LIST" illustration), return the screwdriver to your nearest Sears store or Craftsman outlet to have the screwdriver replaced.Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
- Page 11 work light. To secure your new rechargeable Fig. 1 Power Unit screwdriver from possible failure, the battery is in a low-charge condition when initially shipped. Therefore, you should charge it at for least 10 hours prior to use. Charging your tool for at least 10 hours during the first cycle of use will insure optimum battery performance.
- Page 12 For low light situations. POWER UNIT After the initial charging cycle, the tool should be charged for 3-5 hours for optimum performance. TO CHARGE (FIG. 2) Make sure your screwdriver has completely stopped before attempting charge Forward/ Fig. 2 Insert the power unit plug into Reverse charging socket,...
- Page 13 For best results, 1/4" screwdriver bits are recommended. Never engage the trigger switch when changing screwdriver bits. Always lock the trigger switch when changing drill bits. (See forward/reverse switch instructions) FORWARD/REVERSE SWITCH (Fig.4) The forward/reverse switch determines the running direction of the tool and also serves as a trigger switch lock.
- Page 14 can be used but nothing like alcohol, gasoline, or other such leaning agents. Never use caustic agents to clean plastic parts. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operations or when blowing dust. If operation is dusty, also wear a dust mask.
- Page 15 PROBLEM CAUSE SOLUTION The screwdriver does Battery pack is Recharge the battery not work exhausted pack 17088 Manual Revised 09-0728 Page 15...
- Page 16 Screwdriver MODEL NUMBER 320.17088 Always mention the Model Number when ordering parts for this tool \\\\\\\\\\\\\\\ I c_<:, 17088 Manual Revised 09-0728 Page 16...
- Page 17 43789 Left Housing 43773 Round Pin 43791 Reversing Levers 43792 Ornament Cover 70286 Tapping Screw 01109 Reed TH0709-7 Gear Box 43790 Switch Button 70362 Tapping Screw 43789 Right Housing 43774 Spring 34700 Current-conducting Plate 43771 Reversing Levers Circuit Board 43772 Charging Circuit Board 92119...
- Page 18 17088 Manual Revised 09=0728 Page 18...
- Page 19 17088 Manual Revised 09=0728 Page 19...
- Page 20 Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.