Step 10 Slide Duct Cover Down; Step 11 Install Filters; Step 12 Install Rods - GE Monogram ZV42I Installation Instructions Manual

Island vent hoods

Hide thumbs Also See for Monogram ZV42I:

Table of Contents

STEP 10

SLIDE DUCT COVER

DOWN

SKIP THIS STEP IF USING THE SUPPLIED DUCT

COVER

• Hold the duct cover in place and remove the

temporary stop screw. Return the screw to the

storage location for future use.

• Slide the lower duct cover down onto the hood.

• Place filter drip trays into the rear of the hood.

• Insert the filter into the upper opening and drop into

the trays.

• To remove the filters, grasp the knobs and push the

filter up and lift out.

Installation Instructions

• Use a flat blade screwdriver to install stand-offs into

the bottom of the hood.

• Align implement rod to stand-offs with the screw hole

towards the inside of the hood. Secure the rod to the

stand-offs with the supplied Allen wrench.

• Follow the same procedure on the opposite side.

Screw

Stand-offs

Into Hood

Use Allen

Wrench to

Secure Rod

to Stand-offs