Quick Links
See also:
Network Manual
Projector
CP-X205/CP-X305
User's Manual (detailed)
Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
024 x 768
024 x 768
024 x 768
024 x 768
52 x 864
280 x 960
280 x 024
280 x 024
280 x 024
600 x 200
280 x 768
400 x 050
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(600x200), the signal will be converted to the projector's panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
37.9
3.5
37.9
37.5
43.3
35.2
37.9
48.
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
9.
75.0
47.7
65.2
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.
VESA
74.5
60.0
VESA
70.
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 6" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
52 x 864 (75Hz)
280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
W-XGA (60Hz)
SXGA+ (60Hz)
Related Manuals for Hitachi CPX305 - XGA LCD Projector
Summary of Contents for Hitachi CPX305 - XGA LCD Projector
- Page 1 Projector CP-X205/CP-X305 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 3.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA...
- Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d)
- Page 3 Connection to the ports Connection to the ports COMPUTER IN1, COMPUTER IN2, MONITOR OUT D-sub 5pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level Signal Signal Video Red...
- Page 4 Connection to the ports (continued) COMPONENT VIDEO Pb/Cb, Pr/Cr RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p),25i(080i) Port Signal Component video Y, 1.0±0.1Vp-p, 75Ω terminator with composite Pb/Cb Component video Pb/Cb, 0.7±0.1Vp-p, 75Ω terminator Pr/Cr Component video Pr/Cr, 0.7±0.1Vp-p, 75Ω terminator S-VIDEO Mini DIN 4pin jack Signal...
-
Page 5: Audio Out
Connection to the ports (continued) AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator AUDIO IN3 RCA jack x2 • 200 mVrms 47kΩ terminator AUDIO OUT Ø3.5 stereo mini jack • 200 mVrms 1kΩ output impedance To input SCART RGB signal;... - Page 6 Connection to the ports (continued) USB B type jack Signal +5V 2 - Data 3 + Data 4 Ground CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Signal Signal Signal (No connection) (No connection) Ground...
-
Page 7: Communications Setting
RS-232C Communication RS-232C Communication CONTROL port RS-232C cable (cross) RS-232C port of the projector of the computer - () () CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) - Page 8 RS-232C Communication (continued) Requesting projector status (Get command) () Send the following request code from the PC to the projector. Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set command) () Send the following setting code from the PC to the projector. H eader + Command data (‘01H’ + ‘00H’ + type (2 bytes) + setting code (2 bytes)) (2) The projector changes the setting based on the above setting code.
- Page 9 RS-232C Communication (continued) RS-232C communication command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60 01 00 BE EF 06 00 19 D3 02 00 00 60 00 00 [Example return] 00 00 01 00 02 00 ...
- Page 10 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 step gray scale BE EF 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale BE EF 06 00 9B FB 01 00 80 30 02 00 Ramp BE EF 06 00 0B FA 01 00 80 30 03 00...
- Page 11 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30 00 00 Decrement BE EF 06 00 3B F4 05 00 B3 30 00 00 COLOR TEMP BE EF 06 00 04 F5 02 00 B5 30 00 00...
- Page 12 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00 09 22 00 00 Decrement BE EF 06 00 26 71 05 00 09 22 00 00 OVER SCAN Reset Execute BE EF 06 00 EC D9 06 00 27 70...
- Page 13 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 SYNC ON G ON BE EF 06 00 CE D6 01 00 10 20 03 00 SYNC ON G OFF BE EF 06 00 5E D7 01 00 10 20 02 00 BE EF 06 00 0D D6 02 00 10 20 00 00 COMPUTER IN2 SYNC ON G ON BE EF 06 00 32 D7 01 00 11 20...
- Page 14 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUDIO-COMPUTER1 Set AUDIO1 BE EF 06 00 6E DC 01 00 30 20 01 00 AUDIO2 BE EF 06 00 9E DC 01 00 30 20 02 00 AUDIO3 BE EF 06 00 0E DD 01 00 30 20 03 00 Turn off BE EF 06 00 FE DD 01 00...
- Page 15 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 06 00 07 D3 01 00 05 30...
- Page 16 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO KEYSTONE TURN OFF BE EF 06 00 EA D1 01 00 0F 20 00 00 TURN ON BE EF 06 00 7A D0 01 00 0F 20 01 00 BE EF 06 00 D9 D1 02 00 0F 20 00 00 AUTO ON TURN OFF BE EF 06 00 3B 89 01 00 20 31...
- Page 17 RS-232C Communication (continued) RS-232C communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code e-SHOT BE EF 06 00 3A C3 01 00 00 35 00 00 IMAGE1 BE EF 06 00 AA C2 01 00 00 35 01 00 IMAGE2 BE EF 06 00 5A C2 01 00 00 35 02 00 IMAGE3 BE EF 06 00 CA C3 01 00 00 35 03 00...