Related Manuals for Gardena 1243
Summary of Contents for Gardena 1243
- Page 1 ® GARDENA Art. 1243 Gebrauchsanweisung Funkzentrale Operating Instructions Central Radio Control Unit Mode d’emploi Télécommande Gebruiksaanwijzing Afstandsbediening met houder Istruzioni per l’uso Centralina radio-trasmittente...
-
Page 2: Table Of Contents
Please keep these operating instructions in a safe place. Contents 1. Where to Use Your GARDENA Central Radio Control Unit 2. For Your Safety .......... -
Page 3: For Your Safety
(test radio range). The Central Radio Control Unit must only be used for controlling Please note Channel Changes display from channels to sensors the Radio Receiver for GARDENA Irrigation Valves and the Sensor and sensor configuration. Radio Switch. System Displays 2. -
Page 4: Quick Reference Operating Instructions
1. Set the hours for the programme start time using the ▲-▼ keys The 3 Display Levels 7. Set programme start time and confirm by pressing the OK key. START-TIME Main Level Time Level Programme Level 2. Set the minutes for the programme start time using the ▲-▼ keys and confirm by pressing OK. -
Page 5: Labelling Irrigation Valves And Radio Switch
6. Labelling Irrigation Valves and Radio Switch If you replace the batteries when the Control Unit is not connect- ed to the mains you will reset the unit. for the hours TIME v Label the Irrigation Valves and Radio Switches using the stick- flash on the display and you must enter the time and day (refer ers provided with the irrigation valves. - Page 6 4. Repeat steps 2 and 3 until all receivers are registered. Setting the watering days : 5. Press the Menu – key. The main level is displayed. (a) every 2 or 3 day (from current day) 6. Test the radio range (refer to section 7.4 Testing the Radio (b) select any day (daily watering possible) Range ).
-
Page 7: Special Functions
8. Special Functions 8.5 Cancelling Receivers 1. Press the Setup key (e.g. using the tip of a pen). 8.1 Opening / Closing Channels Manually is displayed and the free channels flash on the display. SETUP Prerequisite : 2. Press the Menu + key (display / register receivers). All receivers must be registered and the levers of the Irrigation An arrow V is displayed before the first registered receiver Valves must be set to the “AUTO”... - Page 8 8.7 Changing the Default Manual Opening Time 3. Set the arrow V to the sensor you require (e.g. V 7 = sensor 7) using the ▲-▼ keys and assign the sensor to the The default value for the manual opening time can be set channel (e.g.
-
Page 9: Trouble-Shooting
Irrigation Valves and Radio Receivers. – or – 3. Reset key (e.g. using the tip of a ball-point pen.) If other faults occur, please contact GARDENA Customer Service. The unit can be reset from all operating levels by pressing the Reset key. -
Page 10: Technical Data
11. Technical Data EU Certificate of Conformity The undersigned GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D-89079 Ulm External power supply : power pack 12 V DC hereby certifies that, when leaving our factory, the unit indicated below is in accordance with Internal power supply : 4 x 1.5-volt alkaline AA batteries (max. - Page 11 Receiver Channels PROG START-TIME RUN -TIME 2nd Mo Tu We Th Fr Sa Su Sensors Receiver Channels PROG START-TIME RUN -TIME 2nd Mo Tu We Th Fr Sa Su Sensors...
- Page 12 Deutschland Finland Norway GARDENA Kress + Kastner GmbH Habitec Oy GARDENA Norge A / S GARDENA Service Martinkyläntie 52 Postboks 214 Hans-Lorenser-Straße 40 01720 Vantaa 2013 Skjetten D-89079 Ulm France Poland Produktfragen: (07 31) 490 - 123 GARDENA France GARDENA Polska Sp. z o.o.