Table of Contents
ASSEMBLY
WARNING: For your own safety, never connect plug
to power source outlet until assembly steps are
complete and you have read and understand the
safety and operation Instructions. Do not operate
vac with any parts damaged or missing.
1. Remove the lid assembly on the vac from the
bottom section by pulling outward on the flexible
latches as shown. Both latches must be pulled
outward at the same time using both hands as
shown. It may be easier to do if you press down
on the vac with the palms of your hands while
pulling outward on the flexible latches with your
fingers.
COLLECTOR
\
HANDLE
LID
1
PUSH
DOWN
PULL
OUT
FLEXIBLE
LOCKING
TAB
_DRUM
FLEXIBLE
LOCKING
ZAB
2. With the lid assembly removed,
turn the dust
drum upside down on the floor. Locate the four
caster feet and insert them into the bottom of the
drum as shown.
CASTER ___
FOOT
\
DUST DRUM
3. Locate the four casters and insert them into the
sockets of the caster feet as shown. Be sure the
ball on the caster stem is forced all the way into
the socket. You will be able to hear the ballsnap
into the socket and the caster will swivel easily
when positioning
is correct. Turn drum upright.
If your casters are noisy you may put a drop of oil
on the roller shaft to make them quieter.
ROLLERI
CASTER
CASTER
FOOT
4
- Quick Links:
- Assembly
- Operation
- Maintenance
- Repair Parts
Hide quick links:
Table of Contents
