VESA DPMS. ® The E emblem does not represent EPA endorsement NERGY of any product or service. ® As an E Partner, Hitachi,Ltd. has determined that this NERGY ® product meets the E guidelines for energy efficiency. NERGY...
Table of Contents Introduction ..............2 Features Package Overview Cautions................ 3 FCC Statement Warning..........5 TCO'99 Statement ............6 For the Customers in the UK ...........8 Installation ..............10 User Controls..............11 OSD Function Description..........12 OSD Icon Summary............13 Advanced Adjustments ...........14 Specifications ..............15 Troubleshooting ..............16 M o n i t o r...
INTRODUCTION Congratulations on your purchase of this high performance 17" monitor. Using state-of-the-art electronics, this monitor can support up to 1280 x 1024 resolution. The on-screen display(OSD) allows you to customize the display setting to suit your individual needs. Features ☺...
CAUTIONS NEVER REMOVE THE REAR COVER ! The rear cover MUST be removed only by authorized service personnel. This colour monitor contains high voltage components. THE RECEPTACLE SHOULD BE CLOSE TO THE MONITOR AND EASILY ACCESSIBLE ! INSTALL THE UNIT IN A SUITABLE ENVIRONMENT ! DO NOT expose this monitor to rain or moisture to prevent electric shock or fire hazard.
Page 5
CAUTION for 200 - 240V operation only This equipment relies on the protective devices in the building installation for short-circuit and over-current protection. Refer to the following table for the suitable number and location of the protective devices which should be provided in the building installation. Informative examples of protective devices in single - phase equipment or sub - assemblies Protection...
CAUTIONS (Continued) FCC Statement Warning WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For the Customers in CANADA NOTICE : This Class B digital apparatus complies with Canadian ICES-003. TCO'99 Statement Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Page 8
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet) : [email protected] Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements...
CAUTIONS (Continued) For the Customers in the UK THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
Page 10
TRADEMARK ACKNOWLEDGEMENT VGA is a registered trademark of International Business Machines Corporation. VESA is a trademark of a nonprofit organization, Video Electronics Standard Association. ® is a U.S. registered mark of Environmental Protection Agency (EPA). NERGY REMARQUE: Les informations contenues dans ce manuel peuvent être modifiées sans préavis. Le constructeur n’accepte aucune responsabilité...
INSTALLATION 1. Connect the monitor signal cable to the 15-pin mini D-sub (VGA) on the computer. 2. Connect the power cord to the power connector on the back panel of the monitor, then plug the other end into an appropriately grounded electrical outlet that is easily accessible and close to the monitor.
USER CONTROLS 1 Power Switch 2 Power LED Indicator LED Color State Turn monitor on and off. Green Yellow Sleep 3 Select button 4 Adjustments For adjusting the display For selecting OSD parameters in the selected functions. function.
OSD FUNCTION DESCRIPTION Press the select button to display the OSD menu. To select function, press the buttons until the function you want is highlighted. Press the select button to choose the function. Use the buttons to increase or decrease the adjustment of this function.
OSD ICON SUMMARY Icon Function Function Description Brightness Adjusts display brightness Contrast Adjusts display contrast H. Size Increases and decreases screen width H. Position Shifts display image right or left V. Size Increases and decrease screen height V. Position Shifts display image up or down Pin.
6) Push the power button to turn the monitor off and on, then go back to EasyMenu. WARNING: While you will see a full menu of adjustments, Hitachi does not suggest using the other advanced adjustments without Hitachi service staff supervision. Using the other adjustments may cause irregularities in the image that can be time consuming to correct.
TROUBLESHOOTING Please make reference to following solutions for most of the failure symptoms occurred. If the symptom remains after trying the suggested solutions, please contact your local authorized service center. Problem: Power LED is not lit when monitor is powered on. Check to make sure that the power cord is properly connected.
Page 18
Fax: 93 491 3513 Fax: +49- 89-991 80-224 Email: [email protected] Hotline: +49-180-551 25 51 (12ct/min) Email: HSE- [email protected] HITACHI EUROPE srl HITACHI HOME ELECTRONICS (NORDIC) AB Via Tommaso Gulli N.39, 20147 Box 77 S-164 94 Kista Milano, Italia SWEDEN ITALY...