Contents Features ..............3 Programme Selection (Direct Access) ..19 Accessories ............3 Initial Settings ............20 Introduction ............. 4 General Operation ..........21 Preparation ............. 4 Information Banner ........... 21 Safety Precautions ..........4 Electronic Programme Guide (EPG) ....21 Power Source .............
Page 3
Playing MP3 Files ..........32 Store ............. 37 Viewing JPG Files ..........32 Program Table ..........37 Slideshow Options ..........32 Name ............38 Video Playback ..........32 Move ............38 Navigating the Analogue TV Menu System ..33 Delete .............38 Analogue TV Menu System ........33 APS (Auto Programming System) ..38 Picture Menu.............
Features Accessories • Remote controlled colour LCD TV. • Fully integrated digital TV (DVB-T). • Four HDMI connectors for digital video and audio. This connection is also designed to accept high defi nition signals. • USB input. • 200 programmes from VHF, UHF. •...
Introduction Moisture and Water Thank you for choosing this product. This Do not use this device in manual will guide you in the proper a humid and damp place operation of your TV. Before operating (avoid the bathroom, the the TV, please read this manual sink in the kitchen, and near thoroughly.
replacement parts, which are specifi ed by the Disconnecting the Device manufacturer or have the same specifi cations as The mains plug is used to disconnect TV set the original one. Unauthorized substitutions may from the mains and therefore it must remain result in fi...
Overview of the Remote Control Standby Cursor up Cursor right Info Numeric buttons Exit (in DTV mode) Programme up Volume up TV / Digital TV AV / Source Yellow (Feature menu) / Current language Blue (Install menu) / Favourite selection (*) Hold (in TXT mode) / PIP position Update (in TXT mode) / PAP mode Index page / Guide (in DTV mode)
LCD TV and Operating Buttons FRONT VIEW Standby button TV/AV button Programme Up/Down buttons Volume Up/Down buttons “ ” “ Note: Press ” buttons at the same time to view main menu. SIDE VIEW REAR VIEW English - 7 -...
Viewing the Connections- Back Connectors 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital optic cable to transfer audio signals to a device that has S/PDIF input. 2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass effect.
Page 10
6. Component Video Inputs (YPbPr) are used for connecting component video. You can connect the component video and audio sockets with a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure that the letters on your TV, “...
Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view channels that you subscribe to. For more information, see “Conditional Access” section. Side USB input . Note: Codec update cannot be performed. Side HDMI Input is for connecting a device that has an HDMI socket.
Power Connection IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Aerial Connection •...
Using Digital Multimedia Connectors • You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play JPG and MP3 fi les stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.
Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. •...
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information.
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection”...
Using Other Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable sound connection.
Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.
Inserting Batteries in the Switching the TV On/Off Remote Control Handset To Switch the TV On • Remove the battery cover located on the back · Connect the power cord to the 220-240V AC of the handset by gently pulling backwards 50 Hz.
AV Mode Input Selection • Press the “ TV/AV ” button in the control panel Once you have connected external equipment on the TV to switch between AV modes. to your TV, you can switch to different input Operation with the Remote Control sources.
After Automatic Search is completed, the Initial Settings following message asking for analogue channel When the TV set is operated for the fi rst time, search appears on the screen: the IDTV turns on fi rst. Because this is the fi rst time the TV is used, there are no channels stored in the memory.
channel. “ Enter PIN ” will be displayed on the General Operation screen in such a case: Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and normal analogue broadcasting.
INFO (Details) : displays the short extended • Press the TELETEXT ( ) button. programmes in detail. • The digital teletext information appears. Numeric buttons (Jump) : go to preferred • Operate it with the coloured buttons, cursor channel directly via numeric buttons. buttons and “OK”...
To watch a specifi c channel, highlight it using IDTV Menu System “ ” or “ ” button and then press “ OK ” button, The IDTV menu can only be viewed when while the “Select” item on Channel List menu is watching digital terrestrial broadcasting.
Press the “M” button to cancel the editing or OK button to save the new name. Adding Locks to Channels Channel locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Confi...
How to Add a Channel to a Favourites List Program Guide • By pressing “ ” or “ ” buttons, highlight the This section is same with the instructions given channel that you want to add to the favourite in the General Operations page. Please see list.
Note: You can set timers for the desired broadcast and • When no module is inserted, “No Conditional time. Recording broadcasts is also possible by using Access module detected” message appears a recording device that you connect to your TV’s Ext on the screen.
AC3 Audio (*for EU countries only) TV automatically powers up at 3.00 A.M. each day and searches for any new information which In the Confi guration Menu, highlight the AC3 may be broadcast and will download this to Audio item by pressing “ ” or “ ” buttons. Use your receiver automatically.
displayed on the screen. Current Time,Time Zone Setting and Time Zone will be available. Use “ ” or “ ” buttons to highlight the Time Zone Setting. Time Zone Setting is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. Maturity Lock When AUTO is selected, Current Time and (**) If you set Country option as UK in the fi...
Use “ ” or “ ” button to select Standby Search and then press “ ” or “ ” button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure that you select Standby Search as On.
Automatic Channel Scan After APS is fi nalized, the programme table will appear on the screen. In the programme Automatic channel scan is started by pressing table you will see the programme numbers and OK button while Automatic channel scan item names assigned to the programmes.
Select your Country , Language and TXT Language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. To cancel, press BLUE button. The following menu will be displayed during the automatic tuning: By selecting Yes and pressing the OK button, the existing channel table will be deleted.
Note : Some USB compliant devices may not be Slideshow Options supported. Note : If the USB stick is not recognized after power off/on or First Time Installation, fi rst, plug the USB device out and power off/on the TV set. Plug the USB device in again.
Analogue TV Menu System Picture Menu Navigating the Analogue TV Menu System Mode For your viewing requirements, you can set the related mode option. • Press “ M ” to display the main menu. Press “ ” or “ ” button to select Mode . Press “...
Film Mode Sound Menu Films are recorded at a different number of frames per second to normal television programmes. Press “ ” or “ ” button to select Film Mode . Press “ ” or “ ” button to set this feature On or Off.
Press “ ” or “ ” button to select Balance. Store Press “ ” or “ ” button to change the level of Press “ ” or “ ” button to select Store. Press “ the balance. Balance level can be adjusted ”...
Pip Size Hence, if one of those buttons is pressed, Child Lock On will be displayed on the screen when Using this setting, you can set the size of the the menu screen is not visible. Pip window. Press “ ” or “ ” button to highlight Pip Size item.
This feature enables the use of active Fine Tune antennas. Press “ ” or “ ” button to select Fine Tune. Note : Antenna power should be “Off” when standard Press “ ” or “ ” button to adjust the tuning. antenna is used instead of the active antenna.
Country By moving the cursor in four directions you can Press “ ” or “ ” button to select your country. reach 20 programmes in the same page. You If you want to exit from A.P.S. function, press can scroll the pages up or down by pressing the the BLUE button.
In source menu, highlight a source by pressing H (Horizontal) Position “ ” or “ ” button and switch to that mode This item shifts the image horizontally to right by pressing “ ” button. Source options are; hand side or left hand side of the screen. TV , DTV/USB , EXT-1 , EXT-2 , EXT-2S, FAV , Select H Position item by using “...
Feature Menu When you switch to PAP Mode, main window in PAP Mode will be displayed on the right side of Feature menu settings are identical to the the screen. The active window can be changed settings explained in “ Feature Menu ” section by pressing “...
• For 16:9 aspect ratio pictures that have been Zoom squeezed into a normal picture (4:3 aspect This option zooms to the picture. ratio), use the 16:9 mode to restore the picture to its original shape. Use to view a normal picture (4:3 aspect ratio) as this is its original size.
activated, displays time info if the programme Mountains or high buildings can cause double has teletext transmission. pictures or ghost images. Sometimes you can improve the picture quality by changing the P+ / P- and numbers (0-9) direction of the aerial. Press to select a page.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix C : Pin Specifi cations SCART connector pin specifi cations Input signal Input signal AUDIO OUT (RIGHT) Not used AUDIO IN (RIGHT) RGB-R GND AUDIO OUT (LEFT/MONO) AUDIO GND RGB-R / S.VHS CHROMINANCE IN RGB-B GND BLANKING SIGNAL AUDIO IN (LEFT/MONO) COMPOSITE VIDEO GND RGB-B IN BLANKING SIGNAL GND...
Specifi cations TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models Digital...
The product has been installed and used only in accordance with the instructions supplied with the product ii) The product has not been repaired, maintained, or modifi ed by any person other than an Hitachi authorised engineer iii) The product serial number has not been removed or altered...
Page 55
Errata sheet "Video Playback" feature which is mentioned under the caption "Media Browser" (could be on multiple pages of instruction book), does not exist on this TV set; all information about Video Playback feature has been printed in error. Please refer to "Appendix D: Supported File Formats for USB Mode"...
Page 56
Hitachi Consumer Electronics Co. Ltd., Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens Berkshire SL6 8ZE...