Satellite Receiver Operation - Hitachi VT-FX980EUKN Instruction Manual

Connection

There are two connection methods according to the type of satellite receiver.

When using a Scart connector lead:

Satellite receiver

When using an aerial cable:

Aerial

Satellite receiver

Programme the VCR to match the control system of your satellite receiver.

This VCR can control several types of satellite receiver to tune to satellite programmes and record them

with the timer. You must first programme the VCR to match the system control code of your satellite

receiver. Some satellite receivers do not have any corresponding codes. Such a satellite receiver cannot

be controlled by this VCR.

Notes:

• Set your satellite receiver to the 2-digit

programme number indication mode if your

receiver is switchable.

• Place the satellite receiver on the VCR so that

the VCR infrared transmitter is not blocked and

is as close as possible to the infrared receiver of

the satellite receiver.

• You can view a satellite programme even when

playing back a tape by pressing the VCR/TV

button to set VCR to TV mode. Depending on

the type of a satellite receiver, its TV output

socket must be connected to the VCR DECODER

socket, to view a satellite programme.

Scart cable (optional)

To AC outlet

230V/50 Hz

Scart cable (optional)

Aerial cable supplied

To AC outlet

230V/50 Hz

Scart cable (optional)

Satellite receiver position

Note: Install the satellite receiver so its

infrared receiver is not more than 15cm away

from the VCR Infrared transmitter.

DECODER/CANAL PLUS

AUDIO OUT/

SORTIE SON

EURO. A/V

R/D.

L/G.

To "AERIAL"

DECODER/CANAL PLUS

AUDIO OUT/

SORTIE SON

EURO. A/V

R/D.

L/G.

Infrared receiver

VIDEO LINK

COMMERCIAL

ADVANCE

CA

VIDEO LINK

Method A

Aerial

AERIAL

ANTENNE

RF OUT

SORTIE

RF

Method B

AERIAL

ANTENNE

RF OUT

SORTIE

RF

To "RF OUT"

REV

FWD

TAPE

NAVIGATION

REC/

PROG

IRT

Infrared transmitter

73