Command Logging Settings; Sntp Settings; Time Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual
Layer 2 managed gigabit ethernet switch
Hide thumbs
Also See for DGS-3427 - xStack Switch - Stackable:
- User manual (246 pages) ,
- Specifications (5 pages) ,
- Reference manual (629 pages)
Table of Contents
x Stack
System Severity
Severity Level
Click Apply to implement the new System Severity Settings.
Command Logging Settings
This window is used to enable or disable the command logging settings.
To view this window, click Administration > Command Logging Settings, as shown below.
SNTP Settings
Time Settings
This window is used to configure the time settings for the Switch.
To view this window, click Administration > SNTP Settings > Time Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Choose how the alerts are used from the drop-down menu. Select log to send the alert of the
Severity Type configured to the Switch's log for analysis. Choose trap to send it to an SNMP
agent for analysis, or select all to send the chosen alert type to an SNMP agent and the
Switch's log for analysis.
Choose what level of alert will trigger sending the log entry or trap message as defined by the
Severity Name. Select Emergency to send only Emergency events to the Switch's log or
SNMP agent. Select Alert to send Emergency and alert events to the Switch's log or SNMP
agent. Select Critical to send emergency, alert and critical events to the Switch's log or SNMP
agent. Select Error to send error, critical, alert and emergency events to the Switch's log or
SNMP agent. Select Warning to send warning, error, critical, alert and emergency events to
the Switch's log or SNMP agent. Select Notice to send notice, warning, error, critical, alert
and emergency events to the Switch's log or SNMP agent. Select Information to send
information, notice, warning, error, critical, alert and emergency events to the Switch's log or
SNMP agent. Select Debug to send debug, information, notice, warning, error, critical, alert
and emergency events to the Switch's log or SNMP agent.
Figure 2 - 35 Command Logging Settings window
NOTE: When the switch is under the booting procedure, all configuration
commands will not be logged. When the user uses AAA authentication to logged
in, the user name should not be changed if the user has used the Enable Admin
function to replace its privilege.
40
Hide quick links:
Table of Contents
