Attach the TV to
Connect video
the Stand
devices
Step
Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
2
x 2
Base
Leg
Screws
3
R
L
4
x8 (M4 X L12)
QUICK START
GUIDE
BN68-05038A-02
Insert the
Power on and
batteries into the
start the initial
remote control
setup
Step
Step
2
3
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Put a base, legs and screws off to assemble the
stand out of the box.
x 12
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
Insert 4 screws and secure the stand to the TV.
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Smart Touch Control
4
Batteries (AAA x 2)
RCA Adapter
Also included:
User Manual, regulatory guide, 3D Active Glasses,
Cleaning Cloth
5
6
7
x4 (M4 X L12)
Warning: Handling the TV incorrectly
can result in injury. After setting the
stand into the TV, we recommend not
lifting the TV using the stand. Lift it
by grabbing the front and bottom, as
shown.
Stand Parts and Cables
Cable clip
Power cord
Component adapter
Remove the protection film from the bottom of the
TV and stand, as shown by the illustration.
Holding the stand parallel to the screen, slide the
stand into the notches on the back of the TV.
Fit the guide protrusion on each edge of the stand
in the matching hole on the sole of the TV.
Insert 2 screws and secure the stand to the TV.
IR extender
Blanking Bracket