Connecting 5.1 Audio Speakers - HP Media Center m1100 - Desktop PC Getting Started Manual
Getting started guide
Hide thumbs
Also See for Media Center m1100 - Desktop PC:
- Support manual (29 pages) ,
- Update manual (4 pages) ,
- Quick setup (2 pages)
Table of Contents
n
3 is Three Connector
6 is Six Connector
S is Sound Card
40
HP Media Center PC Getting Started Guide
4
Connect the cables to the audio system.
5
Connect the front and rear speakers to the
subwoofer. Refer to the speaker
documentation.
6
Turn on the PC.
7
Plug in the speaker system power.
8
Turn on the speaker system.
The following diagram shows a typical 4.1 audio installation:
Connecting 5.1 Audio Speakers
To connect two front speakers, two rear speakers,
a center speaker, and a subwoofer for six-channel
(5.1 speaker) output:
1
Turn off the PC.
2
.
Connect the front speaker cable to the lime
green audio line out connector that matches
the back of your PC.
3
6
9
After the speakers are connected to the PC,
configure the audio software for sound output
for your PC model:
■
■
■
3
Connect the rear speaker cable to the black
connector that matches the back of your PC.
3
S
■
3 Connector: See "Configuring Audio
Output with Multi-channel Sound
Manager" on page 48.
6 Connector: See "Configuring Audio
Output with Sound Effect Manager" on
page 51.
Sound Card: See "Configuring Audio
Output with a Sound Card" on page 53.
6
For 3 Connector systems, the blue audio
line in connector functions as a rear line
out when a multichannel audio
configuration is activated.
S
- Quick Links:
- Pc Components
Hide quick links:
Table of Contents
