Defining Sntp Servers - Dell PowerConnect 3524P User Manual
User's guide
Hide thumbs
Also See for PowerConnect 3524P:
- Getting started manual (266 pages) ,
- Cli reference manual (538 pages)
Table of Contents
Deleting the Authentication Key
1 Open the SNTP Authentication page.
2 Click Show All.
The Authentication Key Table opens.
3 Select an Authentication Key Table entry.
4 Select the Remove check box.
5 Click Apply Changes.
The entry is removed, and the device is updated.
Defining SNTP Authentication Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP
Authentication page.
Table 6-10. SNTP Authentication CLI Commands
CLI Command
sntp authenticate
sntp trusted key
sntp authentication-key number
md5 value
The following is an example of the CLI commands:
console(config)# sntp authentication-key 8 md5 Calked
console(config)# sntp trusted-key 8
Console(config)# sntp authenticate
Defining SNTP Servers
You can enable SNTP servers, as well as add new SNTP servers, from the SNTP Servers page. To open
the SNTP Servers page, click System → SNTP → Servers in the tree view.
Description
Defines authentication for received Simple Network
Time Protocol (SNTP) traffic from servers.
Authenticates the identity of a system to which
SNTP will synchronize.
Defines an authentication key for SNTP .
Configuring System Information
107
Hide quick links:
Table of Contents
