HP Rp5700 - Point of Sale System Reference Manual page 120
Business system service reference guide
Hide thumbs
Also See for Rp5700 - Point of Sale System:
- Hardware reference manual (68 pages) ,
- Specification (40 pages) ,
- Setup utility manual (17 pages)
Table of Contents
4.
Apply the thermal grease provided in the spares kit to the top of the processor and install the
heatsink atop the processor.
5.
Go to step 7.
6.
If using a new heatsink, remove the protective covering from the bottom of the heatsink and place
it in position atop the processor.
7.
Secure the heatsink to the system board and system board tray with the four captive screws and
attach the heatsink control cable to the system board.
CAUTION:
X) to evenly seat the heatsink on the processor. This is especially important as the pins on the
socket are very fragile and any damage to them may require replacing the system board.
NOTE:
After installing a new processor onto the system board, always update the system ROM to
ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can
be found on the Web at: http://h18000.www1.hp.com/support/files.
110 Chapter 7 Removal and Replacement Procedures — Small Form Factor (SFF) Chassis
Heatsink retaining screws should be tightened in diagonally opposite pairs (as in an
ENWW
Table of Contents
