Installing A Hard Disk Drive In An Internal Shelf - HP Kayak XA-s02 User Manual
Hide thumbs
Also See for Kayak XA-s02:
- User manual (136 pages) ,
- Install manual (27 pages) ,
- Supplementary manual (22 pages)
Table of Contents
geron.bk : geron-2.fb4 Page 36 Sunday, March 22, 1998 5:03 AM
CAUTION
Align the hole in the drive
with the hole in the drive shelf
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
Installing a Hard Disk Drive in an Internal Shelf
The upper internal shelf can house a hard disk drive up to one
inch (1") in height. For a larger disk drive than this, install the
drive in one of the front-access shelves as described on page
38.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 23).
3 Remove the fan connection to the system board (see the illustration
on page 27).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Slide the power supply out to improve access to the internal shelf
(see page 27).
6 Slide the drive into position in the first internal shelf and align the
screw holes in the drive with the four self-retaining screws in the
drive shelf.
Screw hole
Self-retaining
screw
36
English
- Quick Links:
- Removing and Replacing the Cover
Hide quick links:
Table of Contents
