Switch Spanning Tree Group Configuration
To display the following form, go to the Switch Spanning Tree Groups Configuration form. Select a
Spanning Tree Group number, or open the Spanning Tree Groups folder and click Add Spanning Tree
Group.
Spanning Tree bridge parameters can be configured for each Spanning Tree Group.
The following table describes the Spanning Tree Group Configuration controls:
Table 117
Switch Spanning Tree Group Configuration controls
Control
Spanning Tree Group ID (1-128)
Switch Spanning Tree State
Description
Selects a Spanning Tree Group to configure.
NOTE:
Spanning Tree Group 128 is reserved for switch management.
Turns Spanning Tree on or off for the selected STP group.
Configuring the switch
172