Removing The Monitor Pedestal Base - HP GX007AA User Manual

You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,

or other mounting fixture.

CAUTION:

power and signal cables are both disconnected. If the monitor has a connected audio cable, disconnect

it.

1.

Disconnect and remove the signal and power cables from the back of the monitor.

2.

Lay the monitor face down on a flat surface.

3.

Remove the screws on the back of the monitor that connect the monitor panel with the pedestal

base.

a.

On the double-hinged base, there are four screws that connect the monitor panel to the

pedestal base.

Figure 3-16

16

Chapter 3 Setting Up the Monitor

Before beginning to disassemble the monitor, be sure the monitor is turned off and the

Removing the Double-Hinged Pedestal Base