HP 2509m - 25" LCD Monitor User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Monitor
  5. 2009m - 20" LCD Monitor
  6. User manual

HP 2509m - 25" LCD Monitor User Manual

User's guide w2228h, 2229h w2448h, w2448hc, w2558hc lcd display
Hide thumbs Also See for 2509m - 25" LCD Monitor:
Table of Contents

Quick Links

See also: Reference Manual , Installation Manual
User's Guide
w2228h
2229h
w2448h/hc
w2558hc
Table of Contents
loading

Related Manuals for HP 2509m - 25" LCD Monitor

Summary of Contents for HP 2509m - 25" LCD Monitor

  • Page 1 User’s Guide w2228h 2229h w2448h/hc w2558hc...
  • Page 2 ENERGY STAR and the ENERGY STAR logo are U.S. registered marks of the United States Environmental Protection Agency. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. HP supports lawful use of technology and does not endorse or encourage the use of its products for purposes other than those permitted by copyright law.

  • Page 3: Notational Conventions

    Notational Conventions The following section describes notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon. These blocks are notes, cautions, and warnings, and they are used as follows: WARNING: Indicates that failure to follow directions could result in bodily harm or loss of life.
  • Page 4 User’s Guide...

  • Page 5: Table Of Contents

    Contents Notational Conventions.......................... iii Notes, Cautions, and Warnings......................iii 1 Product Features HP LCD Monitors ..........................1–1 Features ............................1–1 2 Safety and Maintenance Guidelines Important Safety Information ........................ 2–1 Safety Precautions ......................... 2–1 Maintenance Guidelines........................2–2 Cleaning the Monitor .......................... 2–2 3 Setting Up the Monitor Unpacking the Monitor........................
  • Page 6 4 Operating the Monitor CD Software and Utilities ........................4–1 Installing Drivers..........................4–1 Downloading updated drivers from the Internet ................4–1 Pivot Pro Software (Select Models)....................4–1 Using the Auto-Adjustment Function ....................4–2 My Display Software (Select Models) ....................4–3 Front-Panel Controls ..........................
  • Page 7 C Agency Regulatory Notices Federal Communications Commission Notice..................C–1 Modifications..........................C–1 Cables ............................C–1 Declaration of Conformity for Products Marked with FCC Logo, United States Only ........C–1 Materials Disposal ..........................C–2 Chemical Substances ..........................C–2 Canadian Notice ..........................C–2 Avis Canadien ...........................C–2 European Union Regulatory Notice .......................C–2 Disposal of Waste Equipment by Users in Private Households in the European Union........C–3 Japanese Notice..........................C–3 Japanese Power Cord Notice.......................C–3...
  • Page 8 viii User’s Guide...

  • Page 9: Product Features

    Product Features HP LCD Monitors The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen. This guide discusses the following models: w2228h LCD monitor ■ 2229h LCD monitor ■ w2448h/hc LCD monitor ■ w2558hc LCD monitor ■...
  • Page 10 Product Features Ambient light sensor (select models only) ■ Task light (select models only) ■ Keyboard parking ■ Power Saver to reduce energy consumption ■ Quick View settings display ■ CD included: ■ Drivers ❏ Auto-adjustment software ❏ My Display software ❏...

  • Page 11: Safety And Maintenance Guidelines

    Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet.

  • Page 12: Maintenance Guidelines

    Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating ■ properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service provider. Adjust only those controls that are described in the operating instructions.

  • Page 13: Setting Up The Monitor

    Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Determine whether the monitor will be desktop mounted or wall-mounted. See “Installing the Monitor.” 4.

  • Page 14: Wall-Mounting The Monitor

    Setting Up the Monitor 3. Holding the base of the monitor, lift up the panel at its top without touching or putting pressure on the screen (1). 4. Remove the shipping strap (do not cut it) (2). 5. Put the shipping strap in a safe place, in case you need it to ship the monitor. 6.

  • Page 15: Connecting The Vga (Analog) Or Dvi-D (Digital) Cable

    Setting Up the Monitor 6. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors.

  • Page 16: To Connect The Vga Cable

    Setting Up the Monitor To connect the VGA cable Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer. To connect the DVI-D cable Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI video connector on the computer.

  • Page 17: Audio And Video Cables And Adapters

    Setting Up the Monitor Audio and Video Cables and Adapters The following table shows the cable and adapter types that may be required to connect the monitor to the computer, TV, or set-top box. The number and type of cables required may vary by model. Some cables and adapters are included for select models only and may be sold separately.

  • Page 18: Connecting The Audio Cable

    Setting Up the Monitor Connecting the Audio Cable Connect the built-in monitor speakers to the computer by using the audio cable, as shown in the following illustration. Connecting the audio cables—connector locations may vary Connecting the USB Hub Cable Connect the USB hub cable from the computer to the USB In connector on the monitor. This enables USB 2.0 ports on the monitor.

  • Page 19: Connecting Usb Devices To The Monitor

    Setting Up the Monitor Connecting USB Devices to the Monitor You can connect four USB devices, such as a USB flash drive or a digital camcorder, to your monitor. Do this only after you have connected the USB hub cable from the computer to the monitor. Connecting the Power Cable 1.

  • Page 20: Cable Management

    Setting Up the Monitor Cable Management The HP LCD monitors have two cable tunnels on either side for cable management. Cables can be easily secured and are hidden when viewed from the front. NOTE: If your monitor has the pivot feature, make sure the cords are set loosely enough so they will not pull and disconnect when the monitor is pivoted.

  • Page 21: Adjusting The Swivel

    Setting Up the Monitor CAUTION: The monitor can fall back if the hinge is extended fully and the monitor screen is tilted back too far. Adjusting the Swivel The HP LCD monitor allows a usable range of motion with the swivel feature. CAUTION: To avoid breakage or other damage, avoid applying pressure to the LCD screen while swiveling it or changing the tilt.

  • Page 22: Adjusting The Height

    Setting Up the Monitor Adjusting the Height The monitor adjusts up and down easily by extending or lowering the hinge. Pivoting the Monitor NOTE: For full functionality of this pivot feature (select models only), the My Display software may need to be installed.
  • Page 23 Setting Up the Monitor CAUTION: The first step is important—the double-hinged monitor can scratch the base surface if the monitor is not tilted back enough before pivoting it. 2. If the monitor is in its landscape position, after it is tilted back, pivot it clockwise to portrait position. If it is in portrait position, tilt it back and pivot the monitor counterclockwise to landscape orientation.

  • Page 24: Keyboard Parking

    Setting Up the Monitor Keyboard Parking If you need more space on your desktop, place the keyboard under the monitor when not in use. 3–12 User’s Guide...

  • Page 25: Operating The Monitor

    Operating the Monitor CD Software and Utilities The CD that is included with this monitor contains the drivers and software that you can install on your computer. Installing Drivers If you determine that you need to update the drivers, you can install the monitor-driver INF and ICM files from the CD, or download them from the Internet.

  • Page 26: Using The Auto-Adjustment Function

    Operating the Monitor Using the Auto-Adjustment Function You can easily optimize the screen performance for the VGA input by using the Auto/Select button on the monitor and the auto-adjustment pattern software on the CD provided. Do not use this procedure if your monitor is using a DVI or HDMI input. If your monitor is using the VGA input, this procedure can correct the following image-quality conditions: Fuzzy or unclear focus ■...

  • Page 27: My Display Software (Select Models)

    Operating the Monitor My Display Software (Select Models) Use My Display to choose preferences for optimum viewing. You can select settings for gaming, movies, photo editing or just working on documents and spreadsheets. My Display also provides an easy way to adjust settings such as brightness, color, and contrast.

  • Page 28: Using The Onscreen Display (Osd)

    Operating the Monitor Using the Onscreen Display (OSD) An onscreen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time. NOTE: You can use My Display OSD software or the front-panel control buttons to adjust settings. 1.
  • Page 29 Operating the Monitor Main Menu Icon Options Submenu Options Description Switch Video Input Switches the video input signal source when the monitor is (select models only) connected to two active and valid video sources. Switching video input sources may take several seconds. Brightness Adjusts the brightness level of the screen.
  • Page 30 Operating the Monitor Main Menu Icon Options Submenu Options Description (Continued) Color Selects the screen color. The factory default is 6500 K or Custom Color, depending on the model. 9300 K Changes to slightly blueish white. 6500 K Changes to slightly reddish white. Custom Color Selects and adjusts your own color scales: R —...
  • Page 31 Operating the Monitor Main Menu Icon Options Submenu Options Description (Continued) Management Power-On Status Displays the operating status of the monitor each time the (continued) Display monitor is powered on. Select the location to which to display the status: Middle Bottom The factory default is Top or Off, depending on the model.

  • Page 32: Selecting Video Input Connectors

    Operating the Monitor Selecting Video Input Connectors The input connectors are: VGA connector (analog) ■ DVI-D connector (digital) ■ HDMI connector ■ The monitor automatically determines which inputs have valid video signals, and displays the image. You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is DVI.

  • Page 33: Power-Saver Feature

    Operating the Monitor To obtain the best results: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Display the adjustment-pattern application provided on the CD. 3. Access the OSD menu, then select Image Control. 4. Set the main Clock settings correctly first, because the Clock Phase settings depend on the main Clock setting. When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears.

  • Page 34: Task Light (Select Models)

    Operating the Monitor Task Light (Select Models) The task light sheds warm white light in front of the monitor. It is located just to the left of the OSD front panel buttons. Press the button to operate the light: Press once for 100% illumination ■...

  • Page 35: Capturing Webcam Video And Snapshots

    Operating the Monitor Capturing Webcam Video and Snapshots To use CyberLink YouCam after you install it from the provided CD: 1. Click the Windows Vista start button 2. Click All Programs, CyberLink YouCam, and then click CyberLink YouCam again. 3. Click Tutorials to view an instructional video. Having a Video Chat or Making Conference Calls To set up a video chat, you must have a connection to the Internet, an ISP, and software that enables you to make video calls over the Internet.
  • Page 36 Operating the Monitor 4–12 User’s Guide...

  • Page 37: Operating The Digital Picture Frame Card Reader (Select Models)

    Operating the Digital Picture Frame Card Reader (Select Models) The Digital Picture Frame (DPF) card reader can be used when your computer is on or off. When your computer is on, it can search through the memory cards inserted in the DPF card reader. When your computer is off, the DPF card reader is capable of operating on its own;...

  • Page 38: Using The Monitor Menu With The Remote Control

    Operating the Digital Picture Frame Card Reader (Select Models) Using the Monitor Menu with the Remote Control The remote control is designed for easy navigation through all the choices for the DPF card reader. 1. Point the remote control at the remote control sensor on the display; the receiver is in the bezel at the bottom center of the display.

  • Page 39: Main Menu

    Operating the Digital Picture Frame Card Reader (Select Models) 3. The action control buttons let you perform various tasks: go to the Settings Menu (J), go to the Main Menu on the monitor (K), start a slide show (L), save photo changes on your media card (M), manipulate the size of a photo image (N), and rotate a photo image (O).

  • Page 40: Viewing A Slide Show

    Operating the Digital Picture Frame Card Reader (Select Models) 6. The selected image appears on the screen. NOTE: If multiple images were selected, slideshow mode is activated. 7. To rotate the image, press the Rotate button. 8. To modify the screen size and aspect ratio, press the Aspect button. 9.

  • Page 41: Watching Video Files

    Operating the Digital Picture Frame Card Reader (Select Models) 4. Press a navigation button to select an audio file. a. The DPF card reader adds a check mark in front of the title. b. Press OK to add to the slide show music list. c.

  • Page 42: Changing The Language Setting

    Operating the Digital Picture Frame Card Reader (Select Models) 3. Use the navigation buttons to move to the Settings icon and then press the OK button. Or press the Setup button on the remote. 4. The Settings Menu shows the current settings. 5.

  • Page 43: Changing The Slideshow Transition

    Operating the Digital Picture Frame Card Reader (Select Models) Changing the slideshow transition 1. Use the navigation buttons to select the Slideshow Transition setting. When it is selected, it is highlighted in blue. 2. Press the Right Arrow button to scroll through the slideshow transition choices. The current choices are: Normal* (no transitional effect) ❏...

  • Page 44: Adjusting The Lcd Settings For Dpf

    Operating the Digital Picture Frame Card Reader (Select Models) Adjusting the LCD settings for DPF 1. Use the navigation buttons to select Adjust LCD setting. When it is selected, it is highlighted in blue. 2. Press the Right Arrow button to view the LCD Setting choices. The current choices are: Brightness ❏...

  • Page 45: Preparing The Monitor For Shipping

    Preparing the Monitor for Shipping Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. WARNING: Before folding the monitor, turn off the monitor power, and disconnect all power, video, and audio cables.
  • Page 46 Preparing the Monitor for Shipping 3. Place the shipping strap around the base, pull it tight, and connect it by sliding the strap ends through the slips. 4. Lower the monitor screen down flat, horizontal to the desktop. 5. Pivot the monitor to the portrait position (in the figure, you would be facing the monitor where the straight arrow is).

  • Page 47: Troubleshooting

    Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions: Problem Solution Power LED is not on. Make sure the Power button is on, and the power cord is properly connected to a grounded power outlet and to the monitor.
  • Page 48 Troubleshooting Problem Solution (Continued) Unable to hear audio from Do the following: built-in speakers. Ensure the source signal is good by using headphones at the source. ■ Press the Menu button to access the OSD menu. Select Management, and then select ■...

  • Page 49: Getting Support From Hp.com

    Troubleshooting Getting Support from hp.com Before you contact customer service, refer to HP Technical Support at: http://www.hp.com/support Select your country/region, and then follow the links to the support page for your monitor. Preparing to Call Technical Support If you cannot solve a problem by using the troubleshooting tips in this section, you might have to call technical support.
  • Page 50 Troubleshooting A–4 User’s Guide...

  • Page 51: B Technical Specifications

    Technical Specifications All specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. HP LCD Monitors Face treatment: Antiglare polarizer with hard coating Input Terminals: VGA connector (select models) ■ DVI-D 24-pin D-type connector ■...
  • Page 52 Technical Specifications Specifications (Continued) model w2448 Display Type: TFT LCD active matrix Viewable Image Size: 24.0 in., 61.0 cm diagonal Tilt: –5 to +25 Maximum Weight (unpacked): 21.6 lb, 9.8 kg Dimensions (h x w x d) (high position): 19.7 x 23.1 x 11.4 in., 500 x 586 x 289 mm (low position): 16.3 x 23.1 x 11.4 in., 415 x 586 x 289 mm Maximum Graphics Resolution:...

  • Page 53: Preset Video And High-Definition Modes

    Technical Specifications Preset Video and High-Definition Modes The monitor automatically recognizes many preset video input modes that will appear properly sized and centered on the screen. The following modes are assigned at the factory and are the most commonly used display resolutions: w2228h and 2229h support preset video modes 1 through 20.
  • Page 54 Technical Specifications Factory Preset Video Input Modes, w2448 Horizontal Vertical Preset Resolution Frequency (kHz) Frequency (Hz) 640 x 480 31.5 59.9 640 x 480 37.5 75.0 720 x 400 31.5 70.0 800 x 600 37.9 60.3 800 x 600 46.9 75.0 832 x 624 49.7...
  • Page 55 Technical Specifications Factory Preset Video Input Modes, w2558 Horizontal Vertical Preset Resolution Frequency (kHz) Frequency (Hz) 640 x 480 31.5 59.9 640 x 480 37.5 75.0 720 x 400 31.5 70.1 800 x 600 37.9 60.3 800 x 600 46.9 75.0 832 x 624 49.7...

  • Page 56: Lcd Monitor Quality And Pixel Policy

    Technical Specifications LCD Monitor Quality and Pixel Policy The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD Monitor.

  • Page 57: Federal Communications Commission Notice

    Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.

  • Page 58: Materials Disposal

    ■ Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product:...

  • Page 59: Japanese Notice

    Agency Regulatory Notices Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.

  • Page 60: Korean Notice

    Agency Regulatory Notices Korean Notice ® EPA ENERGY STAR Compliance ® Products marked with the ENERGY STAR logo on the packaging box qualify with the ® U.S. Environmental Protection Agency’s ENERGY STAR guidelines for energy efficiency. ® Products with the ENERGY STAR label are designed to use less energy, help you save money on utility bills, and help protect the environment.
  • Page 61 Agency Regulatory Notices The Table of Toxic and Hazardous Substances/Elements and their Content as required by China’s Management Methods for Controlling Pollution by Electronic Information Products Toxic and Hazardous Substances and Elements Part Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd)
  • Page 62 Part number: 490757-009...

This manual is also suitable for:

Ff621aaRg556aa - pavilion w22 - 22" lcd monitorW2207 - 22" lcd monitorW2207h - 22" lcd monitorW2408h - 24" lcd monitorW2558hc - 25.5" lcd monitor ... Show all

Table of Contents