Fabric Binding; View; User Sessions - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Ha-fabric manager user guide
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Service manual (322 pages) ,
- User manual (300 pages) ,
- Reference manual (214 pages)
Table of Contents
Using the Menu Bar
•
Domain RSCNs — parameter available through the Configure Switch
Parameters dialog box. Refer to
page 8-6
•
Insistent Domain ID — parameter available through the Configure Switch
Parameters dialog box. Refer to
page 8-6
For complete instructions on using this option and the SANtegrity features, refer to
Enterprise Fabric Mode on page
Fabric Binding
This option is only active if the SANtegrity feature key is installed on each in the
fabric. For general instructions on enabling feature keys, refer to Chapter 3 in the
Product Manager user manual for your Switch or Director product. Once SANtegrity
is installed and enabled, you can configure fabric binding for a specific fabric by
selecting the fabric in Fabrics tab, then selecting Fabric Binding option from the
Fabrics menu. This displays the Fabric Binding dialog box. Use this dialog box to
enable and disable Fabric Binding and restrict unspecified Switches from attaching to
the selected fabric.
For complete instructions on using this option, refer to
View
The View menu displays options that alter the view of application components.
User Sessions
Choose the User Sessions option to display the User Sessions dialog box
(Figure
3–1). This dialog box lists all the current management sessions, including the
name of each user connection, the network address of the user, and the time when the
connection was established. Click Close when you have finished reviewing the
sessions.
Figure 3–1: User Sessions dialog box
3–6
for more information.
for more information.
8-12.
Enable/Disable and Online State Functions on
Enable/Disable and Online State Functions on
Fabric Binding on page
8-6.
ha-fabric manager user guide
Chapters
Table of Contents
