Related Manuals for HP AJ750A - StorageWorks Modular Smart Array 2000 Dual I/O Storage Enclosure
Summary of Contents for HP AJ750A - StorageWorks Modular Smart Array 2000 Dual I/O Storage Enclosure
- Page 1 HP StorageWorks MSA2000 3.5-inch LFF Drive Enclosure Firmware Release Notes Part number: 536919 003 Third edition: February 2010...
- Page 2 Legal and notice information © Copyright 2009-2010 Hewlett-Packard Development Company, L.P.
-
Page 3: Product Models
Firmware version: O300B28 Description These release notes are for the firmware indicated above, which adds improvements and corrects issues found during use and additional qualification testing after initial product release. Firmware can be installed from any computer running a supported operating system with an Ethernet connection to the storage array system. -
Page 4: Installation Instructions
Enhancements • Added support for the P2000 G3 MSA Array System. • In systems operating on a single power supply, performance was improved by implementing a staggered spin-up for the disk drives in the enclosures. (Do not perform system updates or operate the enclosure for an extended period of time on one power supply;... - Page 5 NOTE: To install this firmware, you must download the firmware package from the HP website and save the file to your local filesystem. Smart Component installation instructions for Windows environments This is a self-extracting executable module. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).
-
Page 6
Smart Component installation instructions for Linux environments Place the downloaded firmware package in a temporary directory. Open a Linux command console. From the directory containing the downloaded file, enable execute access by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file. Execute the Smart Component by entering a command similar to the following: ./ CPxxxxxx.scexe --target
... - Page 7 Instructions using Storage Management Utility (SMU) — MSA2000 G1 environments WARNING! Do not cycle power or restart devices during a firmware update. If the update is interrupted or there is a power failure, the module could become inoperative. If this occurs, contact technical support. The module may need to be returned to the factory for reprogramming.
- Page 8 Installation instructions using Storage Management Utility (SMU) — MSA2000 G2 and P2000 G3 environments WARNING! Do not cycle power or restart devices during a firmware update. If the update is interrupted or there is a power failure, the module could become inoperative. If this occurs, contact technical support. The module may need to be returned to the factory for reprogramming.
- Page 9 Installation instructions using FTP WARNING! Do not cycle power or restart devices during a firmware update. If the update is interrupted or there is a power failure, the module could become inoperative. If this occurs, contact technical support. The module may need to be returned to the factory for reprogramming. Place the downloaded firmware package in a temporary directory.
-
Page 10: Effective Date
Effective date February 2010...