Show Bridge Address-Table - Dell PowerConnect 3424 Cli Reference Manual
Command line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 3424:
- Release notes (9 pages) ,
- User manual (402 pages) ,
- Specifications (2 pages)
Table of Contents
Default Configuration
No addresses are defined.
Command Mode
Interface configuration (Ethernet, port-channel) mode; cannot be configured for a range of
interfaces (range context).
User Guidelines
•
The command enables adding secure MAC addresses to a routed port in port security mode.
•
The command is available when the port is a routed port and in port security mode. The
address is deleted if the port exits the security mode or is not a routed port.
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port 1/e1.
Console(config)# interface ethernet 1/e1
Console(config-if)# port security routed secure-address
66:66:66:66:66:66
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all entries in the
bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-
number]
vlan — Specifies a valid VLAN, such as VLAN 1.
•
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Address Table Commands
109
- Quick Links:
- Introduction
- Ip Addressing
Hide quick links:
Table of Contents
