Zoning Requirements And Device Mappings - HP 2000sa Deployment Manual
Hp direct-connect external sas storage for hp bladesystem solutions deployment guide
Hide thumbs
Also See for 2000sa:
- User manual (76 pages) ,
- Quickspecs (21 pages) ,
- Installation instructions (2 pages)
Table of Contents
Zoning requirements and device mappings
Tables in this section show the device mappings and subsequent zoning requirements of solution
devices:
BladeSystem c-Class enclosure model
Server type (half height, full height, half height double density, and full height double wide)
Mezzanine slot (P700m location)
BladeSystem c-Class enclosure server device bay (server blade location)
BladeSystem c-Class enclosure interconnect bay (switch blade location)
3Gb SAS BL Switch port to which the external SAS storage enclosure that contains the zone
group is connected (switch port)
IMPORTANT:
For example, as shown in the table, if a full-height server blade is installed in device bay 1-8 of a
c3000 enclosure, and the P700m Controller is installed in server mezzanine slot 2, the switch must
be installed in BladeSystem interconnect bay 3/4 and it should be assigned a zone group that is
in an external storage enclosure attached to switch ports 1, 2, 3, or 4.
Zoning requirements for the c3000 BladeSystem enclosure:
BladeSystem
nl
c-Class
nl
enclosure
nl
model
c3000
Failure to follow these guidelines will result in an unsupported configuration.
Server type
Mezzanine
nl
slot
Half height
2
Full height
2
3
Half height
"A-side"
nl
Double dense
"B-side"
nl
(BL2x220c)
Full height
2
nl
Double wide
3
nl
(BL680c G7)
4
7
BladeSystem
BladeSystem
nl
nl
c-Class
c-Class
nl
nl
enclosure
enclosure
nl
nl
server device bay
interconnect bay
Any
3/4
Any
3/4
Any
3/4
1A – 8A
3/4
1B – 8B
3/4
Any
3/4
Any
3/4
Any
3/4
Any
3/4
Zoning requirements and device mappings
Zone groups must be
in storage
nl
enclosures
nl
connected to these
3Gb SAS BL Switch
ports
1 – 4
1 – 4
5 – 8
1 – 4
5 – 8
1 – 4
5 – 8
5 – 8
1 – 4
39
Table of Contents
Troubleshooting
