Placing The Labels; Finding The Software Version - Cisco Aironet AIR-AP1200 Hardware Installation Manual
Aironet 1200 series access point
Hide thumbs
Also See for Aironet AIR-AP1200:
- Hardware installation manual (138 pages) ,
- User manual (36 pages) ,
- Ordering manual (6 pages)
Table of Contents
Finding the Software Version
Placing the Labels
The 802.11g radio upgrade kit ships with the following labels for the 1100 and 1200 series access points:
•
•
•
Table 7-1
upgrading. Follow these steps to place the labels correctly:
Check the product compliance label to identify the model number of your 1200 series access point.
Step 1
Use the matrix in
Step 2
Table 7-1
1200 Series
Model
AIR-AP1200
AIR-AP1210
AIR-AP1220A
AIR-AP1230A
AIR-AP1220B
AIR-AP1230B
Step 3
Discard any labels that you did not use.
The radio card installation is now complete. To configure the radio with your wireless network settings,
refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.
Finding the Software Version
To find the version of IOS software running on your access point, use a Telnet session to log into the
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.2(11)JA:
ap1200>show version
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(11)JA
Copyright (c) 1986-2003 by Cisco Systems, Inc.
On access points running IOS software, you can also find the software version on the System Software
page in the access point's web-browser interface.
If your access point does not run IOS software, the software version appears at the top left of most pages
in the web-browser interface.
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
7-10
1100 series access point upgrade label (AIR-1121G-x-K9 UPGRADE)—not used on the 1200 series
access point.
1200 series product compliance label (AIR-AP1231G-x-K9)
1200 series radio compliance label (AIR-MP21G-x-K9)
shows where to place the labels on your 1200 series access point, based on the model you are
Table 7-1
to decide which labels to use and where to place them on the access point.
AIR-MP21G-x-K9
Radio Compliance Label
Place over existing AIR-MP20B-x-K9
radio compliance label or location 2 if no
label exists.
—
Chapter 7
2.4-GHz Radio Upgrade
AIR-AP1231G-x-K9 Product
Compliance Label
—
Place over existing AIR-AP12xx-x-K9
product compliance label.
OL-4310-05
Hide quick links:
Table of Contents
Troubleshooting
