Chapter 3
Mounting Instructions
Position the mounting bracket over the partition wall and adjust it to fit. See
Step 6
Figure 3-8
Using the Desktop Holster
Follow these steps to mount the access point on a desktop or other horizontal surface using the supplied
desktop holster.
Step 1
Select a suitable location to place the holster.
Connect the Ethernet and power cables.
Step 2
•
Position the holster so that its back side is facing you.
Step 3
OL-4309-07
Cubicle Wall Bracket
If you are going to secure the access point with a Kensington lock, attach it now.
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
Using the Desktop Holster
Figure
3-8.
3-9