Table of Contents
Chapter 7
2.4-GHz Radio Upgrade
Step 3
Remove the antenna wires from the blank spacer card.
Caution
Step 4
Remove the blank spacer card from the mini-PCI connector.
For instructions on installing the radio card, go to the
Removing a 2.4-GHz Radio
To remove a 2.4-GHz radio card from your access point, follow these steps:
The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper
Caution
handling.
Use your fingers to carefully remove the antenna wire connectors from the 2.4-GHz radio card.
Step 1
Caution
Caution
OL-4310-01
To avoid damaging the antenna wire assemblies, handle them by their connectors.
The antenna connectors can be damaged by using a pair of long-nose pliers during the removal
process.
To avoid damaging the antenna wire assemblies, handle them by their connectors.
"Installing a 2.4-GHz Radio"
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Removing a 2.4-GHz Radio
section.
7-5
Hide quick links:
Chapters
Table of Contents
