Dell POWEREDGE SC440 Hardware Owner's Manual page 55
Dell computer hardware user manual
Hide thumbs
Also See for POWEREDGE SC440:
- Getting started (97 pages) ,
- Information update (7 pages) ,
- Specification (2 pages)
Table of Contents
Figure 3-12. Cabling a SAS or SATA Hard Drive to a SAS Controller Expansion Card
1
1
SAS controller card
4
power cable to hard drive
7
hard drive activity indicator
cable to SAS controller card
10 Ensure that all connectors are properly cabled and firmly seated.
11 Close the system. See "Closing the System" on page 41.
12 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
13 Press to enter the System Setup program (see "Entering the System Setup Program" on
page 27), and ensure that the drive's controller is enabled.
14 Exit the System Setup program and reboot the system.
2
7
2
data cable to SAS controller
card
5
SAS or SATA hard drives (2)
3
4
6
3
AUX_LED connector
6
data cable to hard drive
Installing System Components
5
55
Hide quick links:
Table of Contents
Troubleshooting
