ZyXEL Communications P-660HW-D1 - STANDARD VERSION - 01-10-2007 Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Hardware
  5. P-660HW-D1
  6. Manual

ZyXEL Communications P-660HW-D1 - STANDARD VERSION - 01-10-2007 Manual

Standard version
Hide thumbs Also See for P-660HW-D1 - STANDARD VERSION - 01-10-2007:

Quick Links

See also: User Manual
ZyXEL Confidential
Date:
Author:
340AGL4C0.doc
ZyXEL
Firmware Release Note
P-660HW-D1
Standard version
Release 3.40(AGL.4)C0
Jan 10 ,2007
Ross Meng
1/41
loading

Related Manuals for ZyXEL Communications P-660HW-D1 - STANDARD VERSION - 01-10-2007

Summary of Contents for ZyXEL Communications P-660HW-D1 - STANDARD VERSION - 01-10-2007

  • Page 1 ZyXEL Confidential ZyXEL Firmware Release Note P-660HW-D1 Standard version Release 3.40(AGL.4)C0 Date: Jan 10 ,2007 Author: Ross Meng 1/41 340AGL4C0.doc...

  • Page 2: Supported Platforms

    : V1.06 | 1/20/2006 9:44:11 Notes: The P-660HW-D1, is 4th generation of ZyXEL ADSL product family. It is a high performance ADSL/ADSL2/ADSL2+ router for small/medium office to have Internet access and LAN-to-LAN application over the existing copper line. P-660HW-D1 takes...
  • Page 3 ZyXEL Confidential 1． [BUG FIX] SPRID: 061201023 Symptom: More connection has problem. Condition: When you choose PPP encapsulation in Wan/More Connection, it will crush or reboot: PPPoE + LLC + Dynamic/Static IP, PPPoA + LLC + Dynamic/Static IP, PPPoA + VC + Static IP will lead to crush, PPPoA + VC + Dynamic IP will lead to reboot.
  • Page 4 ZyXEL Confidential Condition: In GUI-＞Security-＞Firewall-＞Rules, add rules in 4 packet directions, when we change any rule ”Active” check box in one of the directions, the others’ will be changed accordingly. 7. [BUG FIX] SPRID: 060915965 Symptom: When add remote node in GUI DUT will crash.
  • Page 5 ZyXEL Confidential Condition: step1:Add a BM rule and save it. step2:Edit the rule again, and change the bandwidth of the child larger than the bandwidth of the parent, but it can be saved. 6. [BUG FIX] SPRID: 060706289 Symptom: In GUI, Status page --＞WLAN Information--＞WEP show is not correct when set some Security such as WPA,WPA-PSK,WPA2,WPA2-PSK.
  • Page 6 ZyXEL Confidential Step1:GUI-＞WAN set two remote node,and use same encapsulation,different VPI/VCI, and set static IP. Lan PC ping remote node 2 gateway successfully. Setp2: Delete the remote node 2, and set the same setting in other rule, such as remote node 5.
  • Page 7 ZyXEL Confidential add wireless card check machine in HTP Engineer note: 1 when WLAN Card exist, "WLAN LED" will be always on 2 when WLAN Card does not exist, "WLAN LED" will be always off 3 when WLAN Card disappear, "WLAN LED" will be off ,HTP test will be Break and "SYSTEM LED"...
  • Page 8 ZyXEL Confidential Problem Condition: Throughput bridge mode downstream ADSL(packet length: 64,128) and ADSL2+ (packet length: 64,128,256,512) can’t meet PQA’s criterion. 2. [BUG FIX] SPRID: 060303431 Problem Symptom: Can not get current time from Time server Problem Condition: step1. Reset default romfile. step2. Config the WAN, set the time server and select the Time Zone is (GMT=08:00) Beijing, Chongqing, Hong Kong, Urumqi, then click “Apply”.
  • Page 9 ZyXEL Confidential WAN can work correctly. step2. Change the Qos type to VBR-RT, the LAN PC can’t ping WAN PC, the LAN to WAN can not work correctly. step3. Then change the Qos type to others type (ex.CBR), the LAN to WAN still can not work correctly; but if reboot the DUT, it can work correctly.
  • Page 10 ZyXEL Confidential 6. [BUG FIX] SPRID: 060112659 Problem Symptom: Whiteboard can’t work well when UPNP is enabling. Problem Condition: Step1.firewall is enabling. Step2.Enable UPNP, WAN first ask for whiteboard, the whiteboard can’t work. Step3.Enable UPNP and “allow users to make configuration changes through UPnP”, the Whiteboard can’t work from LAN to WAN,...
  • Page 11 ZyXEL Confidential 13. [BUG FIX] SPRID: 060116810 Problem Symptom: In the status page, the “-Content filter” should remove to right a little. Problem Condition: Login with admin password, in the status page, the “-Content filter” should remove to right a little.
  • Page 12 ZyXEL Confidential 19. [BUG FIX] SPRID: 060120082 Problem Symptom: help page issue Problem Condition: the detail information see in in attachment in SPR system. 20. [BUG FIX] SPRID: 060223101 Symptom: Add static DHCP client has some problems. Condition: Go to "Network > LAN > Client List" in eWC, add 10 static DHCP clients in table.
  • Page 13 ZyXEL Confidential 26. [BUG FIX] SPRID: 060223112 Symptom: eWC, SMT and CI command inconsistency with Remote Management. Condition: eWC, SMT and CI command inconsistency with Remote Management. 1. In eWC, there are WWW, Telent, FTP, SNMP, DNS and ICMP selections.

  • Page 14: Feature Update]

    ZyXEL Confidential 33. [BUG FIX] SPRID: 060224160 Symptom: DNS page in Remote Management seems useless. Condition: DNS page in Remote Management seems useless step1. In eWC, go to "Advanced > Remote MGNT > DNS" to configure, "Access Status: LAN" and click "Apply" button.
  • Page 15 43. [FEATURE ENHANCE] Support EAP-SIM in 802.1x 44. [FEATURE ENHANCE] Provide CLI command to match the ZyXEL tramsmit output power at TI 1350A. 45. update datapump to 5.1.3.0 46. change default romfile , NAT session pert host is 512 Modifications in V 3.40(AGL.0) b2 | 01/07/2006 1.
  • Page 16 ZyXEL Confidential password entry Step3 Clicking login make the first PC logout automatically, although the second PC also can not login eWC 6. [BUG FIX] SPRID: 051230704 Problem Symptom: ATM QoS Test -PCR/SCR/MBS check have problem(both router and bridge mode) Problem Condition: step1.
  • Page 17 ZyXEL Confidential correctly. Problem Condition: When tripleplay function enable. 2. Change the DHCP to ”Server” and the Client IP Pool Starting address=192.168.1.33.The can’t from DUT. Change Bridge mode, can’t work. 4. Change the tripleplay function to disable in CI command, the LAN PC can get the IP...
  • Page 18 ZyXEL Confidential 16. [BUG FIX] SPRID: 051228631 Problem Symptom: in GUI->advanced->wan, select multicast = IGMP-v2, apply it, then go back the page, it show multicast = IGMP-v1. Problem Condition: in GUI->advanced->wan, select multicast = IGMP-v2, apply it, then go back the page, it show multicast = IGMP-v1.
  • Page 19 ZyXEL Confidential Problem Condition: Step1.in wizard or advanced, select “go to wizard set up”, then click the “exit” button, it pop up a message “are you sure you want to close the windows?”, select then page won’t change. Setp2.but if you select “view device status” or “change password” in wizard, or select “go to advanced setup”...
  • Page 20 ZyXEL Confidential Modifications in V 3.40(AGL.0) b1 | 12/15/2005 1 Create this project for P-660HW-D1 standard version Annex A CI Command List Command Class List Table System Related Command Exit Command Ethernet Related Command WAN Related Command WLAN_Related_Command IP Related Command...
  • Page 21 ZyXEL Confidential feature display feature bit display display function id list firmware display ISDN firmware type hostname [hostname] display system hostname iface disp display iface list [all|used|free] display interrupt service routine interrupt display interrupt status logs category access [0:none/1:log] record the access control logs...
  • Page 22 ZyXEL Confidential link link list system mbuf link pool [type] list system mbuf pool status display system mbuf status disp
    display mbuf status debug [on|off] memory
    display memory content memwrite
    [data list ...] write some data to memory at
    ...
  • Page 23 ZyXEL Confidential destroy packet trace related commands channel =enet0,sdsl00, fr0 [none|incoming|outgoing|bothway] set packet trace direction for a given channel string enable smt trace log switch [on|off] turn on/off the packet trace disp display packet trace send packet trace to other system...
  • Page 24 ZyXEL Confidential debug enable/disable ddns service display display ddns information restart restart ddns logout logout ddns display display CPU utilization Exit Command Home Command Description exit exit smt menu Ethernet Related Command Home...
  • Page 25 ZyXEL Confidential dyinggasp Send ADSL dyinggasp fwav Test the ADSL F/W available ping fwdl Download modem code, but must reset first linedata near Show ADSL near end noise margin Show ADSL far end noise margin open Open ADSL line opencmd...
  • Page 26 ZyXEL Confidential 0xfa to 0x06 txoutputpwr [value] Set the CTRLE register (0xc7), the value is from 0xfa to 0x06 rxoutputpwr [value] Set the CTRLE register (0xc8), the value is from 0xfa to 0x06 maxoutputpwr [value] Set the CTRLE register (0xc9), the value is from...
  • Page 27 ZyXEL Confidential 1130cmd Internal usage. restart_stat Show WLAN restart statistics chg_dot11mod Set WLAN state to mix mode, B only or G only show_rxDesc Show number of Rx host descriptors acxstat Show acx run time statistics IP Related Command Home Command...
  • Page 28 ZyXEL Confidential name [timeout] resolve name to ip-addr status display dns query status table display dns query table server [secondary] [third] set dns server stats clear clear dns statistics disp display dns statistics table display dns table httpd...
  • Page 29 ZyXEL Confidential accept drop an entry from the RIP refuse list activate enable rip merge [on|off] set RIP merge flag refuse add an entry to the rip refuse list request [port] send rip request to some address and port...
  • Page 30 ZyXEL Confidential rsptime [time] set igmp response time start turn on of igmp on iface stop turn off of igmp on iface ttl set ttl threshold v1compat [on|off] turn on/off v1compat on iface robustness ...
  • Page 31 ZyXEL Confidential Bridge Related Command Home Command Description bridge mode <1/0> (enable/disable) turn on/off (1/0) LAN promiscious mode related to bridge local table disp display blt data reset reset blt data traffic display local LAN traffic table monitor [on|off] turn on/off traffice monotor.
  • Page 32 ZyXEL Confidential e-mail Display all the e-mail settings in PNC Display all the available sub commands e-mail mail-server Edit the mail server IP to send the alert return-addr Edit the mail address for returning an email alert ...
  • Page 33 ZyXEL Confidential rule to block PNC log Switch on/off sending the log for matching the default permit rule permit Edit whether a packet is dropped or allowed when it matches this rule active Edit whether a rule is enabled or not protocol <0~255>...
  • Page 34 ZyXEL Confidential insert firewall e-mail Insert email alert settings attack Insert attack alert settings set Insert a specified rule set to the firewall configuration set rule Insert a specified rule in a set to the firewall configuration Display the choices of command list.
  • Page 35 ZyXEL Confidential wan backup timeout [number] Set ICMP timeout Menu 2 wan backup save Save wan backup related parameters Menu 2 wan backup display Display wan backup configurations Menu 2 wan tredir active [on|off] Set traffic redirect on/off Menu 2.1...
  • Page 36 ZyXEL Confidential Set the wan IP routing mode Menu 11.1 wan node routeip [on|off] wan node callsch [set1#][set2#][set3#][set4#] Set call schedule set, set number 0 means empty Menu 11.1 wan node nailedup [on|off] Set nailed up connection on/off Menu 11.1 wan node vpi [num] Set the wan vpi.
  • Page 37 ZyXEL Confidential “disp 1” means to display the NAT server set in buffer, if Menu 15.2 ip nat server disp [1] parameter “1” is omitted, then it will display all the server sets ip nat server save Save the NAT server set buffer into flash Menu 15.2...
  • Page 38 ZyXEL Confidential sys filter set freememory Discard Changes sys snmp disp Display SNMP parameters Menu 22 sys snmp get [community] Set the community string of get Menu 22 SNMP sys snmp set [community] Set the community string of set Menu 22 SNMP...
  • Page 39 ZyXEL Confidential wireless LAN Menu 3.5.1 for wlan macfilter set [set# 1-12] [mac address] Set the mac address of filter wireless LAN wlan clear Clear Working Buffer wlan save Save wireless MAC filter parameters Bandwidth Management Command Description interface enable ...
  • Page 40 ZyXEL Confidential The name is for users’ information. Set the class’ priority. The range is between 0 (the lowest) to 7 (the highest). The default value is 3. ...
  • Page 41 ZyXEL Confidential Sport destination port, source address (netmask), protocol source port and protocol. You may set the value as 0 if you do not care the item. del # Delete a filter which belongs to class # in WAN.