Table of Contents
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
Load one or more discs.
2
•
Place a disc gently into the tray with the disc's label
facing up.
3
Press DISC SKIP button.
•
Rotate the carousel tray so you can load the third, fourth, and
fifth discs .
4
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD
CD
•
Playback starts automatically.
To stop playback,
press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the
stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
•
If pressed twice, "STOP" is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
29
To temporarily pause playback,
press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE (
)
button again.
Selecting a Disc in the Disc changer
The DVD/CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
•
All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press REPEAT on the remote control
one or more times, until REPEAT : DISC is displayed.
If the disc selected is not loaded, the next disc is played automatically.
30
Table of Contents
