Table of Contents
Wall mounting the Series 2600 Non-PWR Switches
1.
2.
W A R N I N G
The Switch 2626-PWR or 2650-PWR Switches are not wall mountable.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to opposite corners of the switch with the included 8-mm M4
screws.
Attach the switch to the wall or wood surface with two 5/8-inch (15.875
mm) number 12 wood screws (not included).
For "Flat" Wall Mounting (Vertical)
5/8-inch
wood screws
The brackets are attached on
opposite corners to improve the
stability of the switch on the wall.
Installing the Switch
Installation Procedures
M4 screws
Wall
2-17
Hide quick links:
Table of Contents
