Table of Contents
Chapter 12
Configuring Dynamic VLAN Membership with VMPS
3/2
3/3
.
.
.
Console> (enable)
Note
The show port command displays dyn- in the Vlan column of the display when a VLAN has not been
assigned to a port.
Monitoring VMPS
To display information about MAC address-to-VLAN mappings, perform one of these tasks in privileged
mode:
Task
Show the VLAN to which a MAC address is mapped in
the database.
Show the MAC addresses that are mapped to a VLAN
in the database.
Show ports belonging to a restricted VLAN.
To show VMPS statistics, perform this task in privileged mode:
Task
Show VMPS statistics.
Maintaining VMPS
To clear VMPS statistics, perform this task in privileged mode:
Task
Clear VMPS statistics.
To clear a VMPS server entry from the VMPS client, perform this task in privileged mode:
Task
Clear a VMPS server entry.
78-15486-01
connect
dyn-5
connect
dyn-5
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
normal
half
normal
half
Command
show vmps mac [mac_address]
show vmps vlan vlan_name
show vmps vlanports vlan_name
Command
show vmps statistics
Command
clear vmps statistics
Command
clear vmps server ip_addr
Configuring VMPS
10
10 BASE-T
10
10 BASE-T
—
Release 8.1
12-9
- Quick Links:
- Configuration Guide
- Catalyst 2980G Switch
Hide quick links:
Table of Contents
