Pioneer BDP 320 - Blu-Ray Disc Player Operating Instructions Manual page 48

Owner's manual

Hide thumbs Also See for BDP 320 - Blu-Ray Disc Player:

Table of Contents

9. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream,

depending on HDMI High Speed Transmission setting and/or the connected HDMI device (page 14).

10. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in

linear PCM (7.1 channels) or DTS Digital Surround bitstream.

If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).

11. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or DTS Digital Surround,

depending on HDMI High Speed Transmission setting and/or the connected HDMI device.

Note

• Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other

cases, output as audio signals of 5.1-channels or less.

• When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device

is lower, the signals are output with the number of channels for which the device is compatible.

• The audio signals output from the DIGITAL OUT terminal have a sampling frequency of 48 kHz (44.1 kHz for audio

CDs).

Table of Contents