Summary of Contents for Daewoo DTC-20, DTC-21, DTY-21, DTY-25, DTY-28, DTY-29, DTZ-24, DTZ-28, DTZ-29
Page 1
DTC-20,21 DTY-21,25,28,29 DTZ-24,28,29 HELPLINE NUMBER : 0870 100 2525 With queries, please quote the page number, reference number and model number SET-UP MANUAL SET-UP MANUAL Colour Television Colour Television...
Page 2
ADDITIONAL INFORMATION FOR TV’S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fi tted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362.
REMOTE CONTROL & TV CONNECTIONS LOCAL CONTROL DTC-20,21 / DTY-21,25,28,29 DTZ-24,28 / DTZ-29U7 Front DTZ-29U3 B1 MAIN POWER button B2 FRONT VIDEO INPUT socket B3 FRONT AUDIO INPUT (L + R) socket B4 HEADPHONE socket B5 STAND-BY indicator Rear C1 SCART 1 socket C2 SCART 2 socket C3 AERIAL jack REMOTE CONTROL UNIT...
IMPORTANT SAFEGUARDS WATER AND MOISTURE The apparatus shall not be exposed to dripping or splashing water and no object fi lled with liquids, such as vases , should be placed on the apparatus. HEAT Never place the set near heat sources. Never put a naked fl...
START UP LANGUAGE MENU The very fi rst time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. The language entered at this stage can still be modifi...
TV/AV SELECTION Front Allows to switch between TV and external modes. By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV / AV (B7) button, the on-screen display is changed as shown (SVHS3 is an option): AV1 >...
Page 8
PROGRAM SELECTION (FROM 0 TO 99) Direct selection Use the remote control NUMBER 0….9 buttons (A3). For two digits program numbers, enter the second digit within 2 seconds. SOUND CONTROL Volume adjustment Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B8).
PICTURE CONTROL You can select three pictures settings, by using the remote control NORMAL button (A17) : - Normal I (standard hard picture) - Normal II (standard soft picture) - Favourite For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu. If an NTSC signal is received, then the TINT adjustment will also be available.
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK SETTING, WAKE UP, NOISE REDUCTION These functions are available in the Features menu (see description page 13). CHILD LOCK This function only allows the TV to be turned on using the remote control. Once the user has set this CHILD LOCK to ON or OFF, it will remain in this condition until the user changes it again.
PICTURE MENU - Select and adjust the level of each function : BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, TINT (if available). - The above modifi ed values are automatically stored in FAVOURITE mode. - NOISE REDUCTION feature can be activated or not. - The OK (A18) or NORMAL button will select the picture presets FAVOURITE, NORMAL I, NORMAL II.
INSTALL MENU Automatic tuning system Program list edition TV system modifi cation Channel number Channel Frequency Channel name Program number Program storage number Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the demodulator and tune Sky News before starting ATSS.
Page 13
Channel skipping - You can select skip „YES” or „NO” using the remote control RED „Skip” button (A11). A program with skip „YES” doesn’t appear on screen when changing channels with the PROGRAM UP (A6) / DOWN (A21) buttons. Manual Channel Tuning Choose a starting point - Select with „Program”...
FEATURES MENU See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 9, HOW TO USE THE SUB-MENUS) 1. When switched to ON: Prevents the use of the TV set without remote control 2.
TELETEXT ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( ) button (A22) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. - Teletext And Teletext (TAT) function (OPTION): if you want to watch two teletext pages on same screen, press the TELETEXT ( )button (A22) again.
Page 16
USEFUL TELETEXT FUNCTIONS INDEX ( ) button (A18): Allows you to return directly to the initial teletext page. SUBPAGE ( ) button (A10): - Press the SUBPAGE button (A10). In the extreme top left corner, instead of the page number, ‘’S..’ ’ will be displayed. This is ready to accept the subpage number.
Page 17
TELETEXT FORMAT PICTURE & SOUND CONTROL Doubling character height Repeatedly pressing the HEIGHT ( ) button (A23) doubles the character height in the following order: Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height. If the page is in UP or DOWN mode, then normal size is automatically set if : - A new page request is made (e.g.