Table of Contents
Inband Management Channel
To access the Inband Management Channel screen, follow this menu selection
sequence:
Table A-13. Inband Management Channel Options (1 of 3)
8799-A2-GB20-10
Main Menu
Configuration
Management and Communication
main/config/management/inband
Slot: 4
INBAND MANAGEMENT CHANNEL
Inband Management Select:
Inband Management Type:
Inband Management Port:
Inband Management Time Slot:
Inband Management DLCI:
Inband Management LMI:
Backup Inband Management Port:
Backup Inband Management Time Slot:
Backup Inband Management DLCI:
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Inband Management Select
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether data on the selected port and time slot will be sent according to the
cross connect configuration or to the MCC card instead.
Enable – Enables the Inband Management Channel.
Disable – Disables the Inband Management Channel.
Inband Management Type
Possible Setting: PPP, Frame Relay
Default Setting: PPP
Specifies the type of data the Inband Management Channel will accept.
PPP – The Inband Managment Channel will accept Point-to-Point Protocol (PPP) data.
Frame Relay
The Inband Management Channel will accept Frame Relay data.
−
April 2003
Current Configuration
Inband Management Channel
Enable
Frame Relay
1
1
16
Standard
2
1
16
A. Configuration Options
Model: 8799
MainMenu
Exit
A-35
Table of Contents
Troubleshooting
