Table of Contents
Negative values: The lower the key played, the higher the Cutoff Frequency
becomes; the higher the key played, the lower the Cutoff Frequency becomes.
Distance
Sets the distance between the Cutoff Frequencies for the Dual Filter types and the
LPF12+BPF6 filter.
This parameter may not be available depending on the Filter Type.
Settings: −128–+127
HPF Cutoff (HPF Cutoff Frequency)
Sets the center frequency for the functions that control the filter cutoff and how fast the FEG
changes according to the key follow setting of HPF.
Increasing the value results in a higher Cutoff Frequency, and the low frequency signals are cut
or blocked to make the sound brighter. Decreasing the value results in a higher Cutoff
Frequency, and the low frequency signals are passed to make the sound deeper.
This parameter is not available when the Filter Type is set to LPF12+HPF12 or LPF6+HPF12.
Settings: 0–1023
HPF Cutoff/Key (HPF Cutoff Key Follow Sensitivity)
Sets the level of the Cutoff Frequency of the high-pass filter according to the position of the key.
This parameter is not available when the Filter Type is set to LPF12+HPF12 or LPF6+HPF12.
Settings: −200%–+200%
Positive values: The lower the key played, the lower the Cutoff Frequency becomes;
the higher the key played, the higher the Cutoff Frequency becomes.
Negative values: The lower the key played, the higher the Cutoff Frequency
becomes; the higher the key played, the lower the Cutoff Frequency becomes.
Gain (Filter Gain)
Sets the Gain (signals sent to the Filter unit).
Lowering the value decreases the volume of the Element.
Settings: 0–255
Filter EG
On the Filter EG screen, you can set the Filter Envelope Generator (FEG) for the Element.
The FEG lets you set the degree (or level) of changes to the Cutoff Frequency and how those
changes evolve over time, starting from the moment you press a key on the keyboard to the
moment the sound decays.
Operation
326
Chapters
Table of Contents
