Installation Procedures
Note: Disconnect the cable from the negative (-) battery terminal.
1. Secure the Mounting Collar (.
Insert Mounting Collar @ into the dashboard, and bend the mounting tabs out with a screwdriver.
Dashboard
2. Secure the rear of the unit.
Mounting Tab
Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not project-
ing outward).
Screwdriver
a) Check the electrical connections by referring to this operating instructions.
b) Connect Mounting Bolt @, using a suitable wrench.
c) Insert Power Connector (3) to the unit.
d) Insert the unit into Mounting Collar © and push it in until a "click" is heard.
@ Power Connector
Unit
@ Mounting Bolt
Unit
e) Secure the rear of the unit to the car by either of the two recommended
methods.
® Using the Rear Support Strap
(Option)
Affix one end of the Rear Support
Strap to the rear of the unit, and the
other end to the fire wall of car, or
some other metallic area.
_ Fire Wall of Car
3mme
Tapping Screw (Option)
Hex.
Nut (Opti
i-S. lex. Nut (Option)
Rear Support Strap (Option)
@Mounting Bolt
45
CQ-FX820/FX720N
