Page 4
REMINDING When opening the door, please pay attention to tearing off the tape in the picture first, and then taking out the plastic limit block. Otherwise, directly opening the door may catch the plastic limit, which may cause deformation of the door panel or shell!
REVERSING THE DOOR POSITION To avoid injury to yourself and/or property, we recommend someone assist you during the door reversal process. Ensure the Appliance is unplugged and empty. NOTE: Adjust the two leveling feet to their highest To take the door off it is necessary to tilt the position.
Page 9
Slot in the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new side and check the fitting between the door/ hinge moving smoothly. Then tighten the screws of upper hinge bracket. Replace the hinge cover and the left side screw cover. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the upper hinge.