Table of Contents
en Basic settings
14.10 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
15 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
Note: You can also adjust the the ba-
sic settings in the Home Connect
app.
36
15.1 Overview of the basic
settings
Programme selector with programme
positions
Set the volume of the signal
1
at the end of the programme:
0 (off) to 4 (very loud)
Set the volume of the signal
2
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
Set the display brightness:
3
1 (low) to 4 (very high)
Adjust the dryness level
4
→ Page 32:
0 (dry) to 3 (driest)
Start the basic (CP1) or in-
5
tensive (CP2) appliance care
programme.
→ "Appliance care", Page 37
Display the number of started
6
programmes.
Restore the appliance to the
7
factory settings (rES).
15.2 Changing the basic set-
tings
To call up the basic settings, press
1.
Basic Settings.
1
2
3
4
5
6
7
Table of Contents
