Electrolux EIFLS60JIW0 Installation Instructions Manual page 17
Electrolux front-load washer
Hide thumbs
Also See for EIFLS60JIW0:
- Use & care manual (30 pages) ,
- Installation manual (56 pages) ,
- Installation instructions manual (56 pages)
Available languages
Available languages
Reversing Door
17
Reattaching door and hardware
M) Reattaching Door Assembly
O) Reinstalling Trim Ring
1
Open the hinge to a 90 degree angle.
1
Close the door.
2
Install the door onto the hinge locating pins.
2
Orient the trim so 12 position is
approximately 34" to the left of top center.
The opening in the trim ring should be on the
hinge side.
3
Insert the trim ring in the slots and rotate it
clockwise approximately 34".
3
Secure the door with 4 long, course-thread,
counter-sunk screws.
P) Reinstalling Trim Plug
1
Open the door to a 90 degree angle.
2
Install the trim plug with 1 long, course-
thread, panhead screw.
4
Close the door and test the operation of the
latch.
N) Reversing Trim Ring
1
Trim ring orientation is marked on the back.
2
Remove the trim ring cover plate. To remove
the cover plate from the right, pivot point is
up. To remove the cover plate from the left,
pivot point is down.
(uP)
Q) Plug in washer and continue operation.
Y D
YD
3
Rotate the trim ring cover plate and move
it to the opposite opening in the trim and
reinsert.
