Beko CEG7302 - CaffeExperto Bean To Cup Coffee Machine Steam Wand Manual

Please read this user manual first!

Please read this entire user manual and all other accompanying documents carefully before using the product and keep them as a reference for future use. If you pass on the product to someone else, please give them the user manual as well. Please take into consideration all warnings and information in the user manual.

Explanation of symbols

The following symbols are used in the various section of this manual:

Important information or useful hints about usage.

This warning for dangerous situations with regard to life and property.

This warning indicates potentially dangerous situations.

This warning indicates the potential for material damage.

Materials are suitable for food contact

Your Fully Automatic Coffee Machine

Technical data

Power supply: 220-240 50-60 Hz
Power: 1350 W

The right to make technical and design changes is reserved.

All declared values on the product and on the printed leaflets were obtained from laboratory measurements performed according to the relevant standards. These values may differ depending on usage and ambient conditions.

Product Dimensions: 27,5 cm (Width) x 35,9 cm (Height) x 41,2 cm (Depth)
Weight: 9.68±0.5kg
Cable Length: 95±5 cm

Ground Coffee Weight (Bean Mode)
Standard: 8±2g
Intense: 10±2g

Drip Tray Capacity: Up to 0.6 L
Coffee Ground (residual) Container Capacity: Up to 10 cups
Water Tank Capacity: 2.0±5%L
Coffee Bean Container Capacity: 250±5%g

Machine Pre-heating time: <50s

Volume of coffee (Default settings):
Espresso: 30±10ml
Double: 60±10ml
Americano: 150±20ml
Ristretto: 20±5ml
Lungo: 60±10ml

Display

Control Panel

1		Lit During Pre-Heating
2		Lit During Ongoing Process
3		Water Emptying Indicator
4		Used for selecting "Ground Coffee" option.
5		Used for selecting "Standard Bean Coffee" option.
6		Used for selecting "Intense Bean Coffee" option.
7		Used for initiating cleaning and descaling functions.
8		Used for receiving hot water from steam nozzle.
9		Used for steam nozzle function.
10		General Error
11		Descale Warning
12		No Water Error
13		No Coffee Bean Error
14		Residual Container Full Error

Preparation

Installation

Remove any protective films, stickers and any other packaging material from the appliance.

Choose a safe end stable surface with an easily reachable power supply and allow the minimum distance from the sides of the machines.

Insert the drip tray. Make sure it is inserted correctly and close the front cover.

Unwind and straighten the power cord and insert the plug into the socket located under the machine. Insert the other end of the power cord into a wall socket with the suitable power voltage. Press the on/off button to turn on the machine.

Filling the water tank

About the protect program: If the water tank is not fully placed into the machine, a protection mode will be activated 1 5 seconds into the brewing process. The hot water button will light up on the control panel.

1. Make sure that the water tank is fully inserted into the machine,
2. Press the hot water button, After the hot water is dispensed, the machine will be in idle.

Lift the water tank by using the lid as the handle.

Take the water tank out.

Rinse the water tank with fresh water and then fill the tank to the Max level and place it back into the machine. Make sure it is fully inserted.

To prevent water overflowing from the water tank, do not add water directly into the appliance from another container.

When "" is lit, the water tank is at a low water level and requires filling

Place the water tank back in by using the lid as the handle.

Close the water tank by using the lid.

Operation

Grinding Adjustment

You can adjust the grinding coarseness by turning the adjustment knob on the bean container:

Never do the grinding adjustment when the grinder is not operating. It may damage the grinder.

The lines on the adjustment knob indicate the coarseness of the grind. Bigger number means coarser grind level.

Filling the bean containers

When "" flashing, the appliance needs to be filled with coffee beans. Storing bean in its original vacuum pack is better to ensure longer lasting freshness. Do not use the coffee bean container for storage purposes for better results.

Remove the bean container lid.

Slowly pour in the coffee beans.

Place the container lid back on.

Using the pre-ground coffee container

Remove the pre-ground coffee container lid.

Slowly put the pre-ground coffee in the pre-ground coffee container.

Place the container lid back on.

Pre-ground coffee container is not a storage unit, it offers a onetime usage (max 12g). Measurement spoon accessory can be used for suggested amount of ground coffee.

Ground coffee button should be pressed and selected from the screen in order to activate this setting.

Using the Cup Warmer

Cups should be placed upside down to ensure internal surface is kept warm and clean (This function uses the internal heat of the machine).

Preparing Your Coffee

Switch on the appliance by pressing the power on/off button. The appliance turns on, starts pre-heating and auto-cleaning. It is ready for use in idle mode in which all icons are lit.

Place a cup under the coffee spout and adjust the height of the spout according to the cup.

Select your coffee by pressing button and the cup lighter will turn on indicating that the appliance is preparing a cup of coffee. When the appliance returns to idle, the coffee is ready to serve.

Press the espresso, americano, ristretto or lungo button depending on your preference.

Adjusting The Strength of Your Coffee

If bean coffee is being used press the "standard bean" or "intense bean" button to adjust the strength of your beverage. If ground coffee is being used, press the "ground coffee" option.

Adjusting The Volume of Your Coffee / Hot Water

You can save the volume of your desired coffee for all beverages types as well as hot water from 25mI to 250mI. (x2 for double)

While making your coffee (espresso, doppio, americano, ristretto or lungo), press and hold the button of the coffee you have selected. The appliance will continue to make the cup of coffee for as long as you hold down the button.

When the volume of coffee meets your desired volume, release the button. If you hear two beeps, that indicates the machine has saved this volume of coffee.

Water adjustment can be made during ongoing coffee preparation (after grinding is completed).

To reset all beverages to default/factory settings

In order to reset to the default settings of all beverage and hot water volume selection saved to memory:

• Press power on/off button and bean button all together for 3 seconds.
  

To reset single beverage to default/factory settings

In order to reset to the default settings of any coffee or hot water volume individually;

• Press power on/off button and beverage button (which is desired to be reset) all together for 3 seconds.
  

Preparing Frothy Milk for Coffee

As the temperature of steam is higher than the temperature of espresso, the espresso should be prepared before making frothy milk. Otherwise, the espresso may burn.

Press steam nozzle icon and wait for steam nozzle to be ready While steam nozzle is pre-heating, the indicator lights will flash.

When the indicator lights are still, steam nozzle is ready for use. Place a milk filled cup or pitcher under the steam nozzle. Press the steam nozzle button again for starting the milk frothing, and stop by pressing again.

Pour the hot frothy milk onto the espresso. You can now enjoy your coffee!

Steam nozzle can be rotated towards the right for easier handling purposes.

After using the steam nozzle, please clean the nozzle of milk residue by wiping the nozzle with the wet cloth. It is recommended to remove any milk residue that may accumulate on the tip of the nozzle by activating the hot water function from the nozzle. After steam nozzle is ready, if steam nozzle is not used for a certain amount of time; the screen will revert back to idle stage.

Hot Water

The appliance can dispense hot water by simply pressing the hot water button "". Press again to stop.

This function can be used to heat up the cup before coffee preparation. First fill the cup with hot water, then pour away the water and use this cup for preparing coffee.

Mode Selection

The machine has three different settings: the default setting, ECO mode and speed mode, In ECO mode, the appliance saves more energy. In speed mode, the user can make their coffee faster than when in the default settings.

	ECO Mode	Speed Mode	Default Settings
Cup Lighter & Steam Nozzle Indicator Lights	Off	On	On
Pre-brewing*	Yes	No	Yes
Auto-shut off time	10 mins	30 mins	20 mins
The pre-brewing function moistens the coffee inside the brewing unit with a small amount of water before full extraction. This expands the coffee grounds to build up greater pressure in the brewer, which helps extract all the oils and bring out the full flavour of the beans.

1. When the machine is on idle, press and hold the for 5 seconds.
2. The will then flash and the following buttons will will light up to indicate different settings:
   In ECO Mode →
   In Speed Mode →
   In Default Settings →
3. Press the "Powder Coffee Button" for ECO mode, the "Standard Bean Coffee Button" for Speed Mode and the "Intense Bean Coffee Button" for Default settings. You'll hear two beeps when the mode has been selected.
4. If you would like the setting to remain unchanged, press again or wait for 5 seconds for the machine to return to idle mode.

Cancelling

On-off button should be pressed once to cancel any running process. Additionally, pressing over a selected beverage once again after preparation started will also cancel the operation.

Pressing the on/off button 2 times will force-shut down the device.

Cleaning

Cleaning the appliance

1. Disconnect the power cord from the mains supply outlet.
2. Pour away all the water/coffee residual inside the drip tray and coffee residual container.
3. Use a damp cloth or non-scratching cleaning agent to clean the liquid stains on the appliance.

Never use any abrasive, vinegar or descaling agents not included in the box to clean the appliance.

Timely cleaning and maintenance of the appliance is highly important in prolonging its life.

Open the front cover. Remove the drip tray and the coffee residual container.

Remove the metal tube by pulling it down. Then remove the nozzle cover by turning it to the left to disassemble the nozzle cover and metal tube.

Empty the coffee residual container and the drip tray. Wash the metal tube with warm running water and use the needle or the bristles of the brush to clean the hole. Wash the nozzle cover with warm running water and use the needle or the bristles of the brush to clean the hole. Dry them afterwards.

Attach the metal tube back to the nozzle cover. Then push it upward to put the nozzle cover back in its place and turn it to the right to lock it.

When lights up, the coffee residual container needs to be emptied. This icon will light up after every 10 coffee brews. Clean the container to fix the error. If the container is clean, remove the container and put it back in its place.

Hold he adjustable coffee spout and pull beck slowly to open the front cover.

Remove the brewing unit. Wash with water and dry afterwards.

Clean the coffee outlet line with brush.

When lights up, it indicates that the brewing unit is missing /incorrectly installed. When is flashing, it indicates that the front cover is not closed.

Descaling Function

When lights up, it indicates that the appliance needs to undergo descaling. The appliance will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of water used.

To start descaling:

1. Fill the water tank until "Descaling Level ".
2. Add one pack of cleaning agent included in the box to the water tank.
3. Place a sufficiently large container under the coffee spout and nozzle.
4. When on idle, press and hold for 3 seconds. You'll hear a beep and the will flash until water tank is empty.
5. Fill the water tank once again until "descale level" with water, and press the button once again to start the second cycle of descaling. If the water tank is removed and placed back, the appliance will detect this action and automatically start the second cycle (without pressing again).
6. Once the water tank is emptied, the screen will go back to idle condition. Descaling is completed. Fill the water tank with fresh water to start preparing coffee.

To reset descale warning status

In order to reset descale warning status:

• Press power on/off button and descale button all together for 3 seconds, .
  

Resetting descaling warning status is not suggested for maintaining the best condition of the appliance.

Empty System Function

Use the empty system function before a long period of non-use and for frost protection.

1. When on idle, press and hold the and the hot water button together for 3 seconds.
2. will then light up.
3. Remove the water tank from the appliance, process will start automatically.
4. When the empty system function is completed, the appliance will switch off automatically.

When the appliance is reused again for the first time after empty system function is used; press the hot water button until water comes out of the spout.

Manual Cleaning / Rinsing Function

You can manually clean / rinse the coffee nozzle before or after use. When in idle, press once.

Using this function before coffee preparation will also ensure hotter coffee.

Deactivating the auto-clean mode

Your appliance cleans itself automatically before and after each brewing operation. You may follow the steps below to deactivate the auto-clean mode.

• Turn on the appliance by pressing the power on/off button and wait until it goes into idle mode.
• Open the front cover.
• Press the power on/off button for 5 seconds and a beep will sound.
• Close the front cover.
• The auto-clean operation has been cancelled.

We recommend that you use the auto-clean mode actively for healthy use.

To cancel auto-clean for once

Press on/off button while machine is turning on or off to bypass this function.

Troubleshooting

Problem	Cause	Solution
The appliance does not work.	The appliance is not connected to the mains.	Plug in and press the switch. Check the cable and the plug.
No or delayed response In several attempts of pressing a function key on the panel.	Appliance is under electromagnetic interference. The panel is dirty.	Unplug the appliance. Restart after a few minutes. Clean the panel with the cloth provided.
The coffee is not hot enough.	The cups have not been pre heated. The brewing unit is too cold.	Place your cup on the cup warmer facing down or rinse the cup with hot water. Make sure that the water in the water tank is not too cold.
Coffee is not coming out of the coffee spout.	The empty system function may have been used previously. The coffee spout may not have been cleaned end is blocked by coffee residues.	Press the hot water button until water comes out of the spout. Clean the coffee spout
The first cup of coffee is of poor quality.	The first running of the grinder does not place a sufficient quantity of coffee into the brewing unit.	Throw the coffee away. The next cups will be better.
The water tank is removed / the water level is very low in the water tank but there is no "" alert.	The area near the water tank connector could be wet.	Wipe off the water around the water tank connector.
The internal drip tray is filled with a lot of water.	The ground coffee is too fine, which blocks the water from coming out.	Adjust the coffee fineness to larger grains for the grinding process.
Coffee is delivered too slowly or a drop at a time.	Coffee grounds are too fine, which blocks the water from coming out.	Adjust the coffee fineness to larger grains for the grinding process.
The indicator flashes to inform that there's no enough coffee beans, but there are plenty inside the container.	The internal coffee grounds cutlet is blocked.	Follow the steps described for cleaning the coffee grounds outlet.
The brewer or the coffee ground tray is impossible to remove.	The appliance did not finish the self-cleaning process and was switched off.	Please switch on the machine again and let it finish its auto cleaning process.
The appliance no longer performs the rinsing cycle when switched on or off.	Improper handling when servicing the appliance may be the cause.	When the appliance is in idle condition, open the front cover. Press and hold the on/off button until you hear 2 beeps. Close the front cover.
The touch buttons are not sensitive.	Not pressing the touch button from the front of the appliance.	Press the lower bottom pan of the symbol of the touch button from the front of the appliance.

Important instructions for safety and environment

This section includes the safety instructions that will help provide protection against risks of personal injury and material loss. Failure to follow these instructions invalidates any warranty.

Danger of electric current

Danger to life due to electric current!

Contact With live wires or components could lead to serious injury or even death!

Observe the following safety precautions to avoid electric shocks:

Danger of burning or scalding

Parts of the coffee machine can become very hot during operation! Dispensed drinks and escaping steam are very hot!

Observe the following safety precautions to avoid burning/scalding yourself and/or others,

Basic safety precautions

Observe the following safety precautions to ensure safe handling of the coffee machine:

• This appliance is intended to be used In household and similar applications such as:
• 
  In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• 
  Avoid spillage on the connector.
• And removed below one because this product is detachable power cord.

Intended use

The Beko fully automatic coffee machine is intended for use in homes and similar applications, such as in staff kitchens, shops, offices and similar areas or by customers in bed & breakfast, hotels, motels and other living accommodation. This coffee machine is not intended for commercial use. The machine is only intended for preparing coffee and heating milk and water. Any other use other than previously stated is considered as improper use.

Danger resulting from improper use!

If the coffee machine is not used for its intended purpose, it may become a source of danger.

Consequently, the coffee machine must only be used for its intended purpose.

Follow the procedures described in this user manual.

No claims of any kind will be accepted for damage or injury resulting from the use of the coffee machine for purposes other than its intended use.

The risk must have been borne solely by the machine owner.

Plug Wiring

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BSI 362 fuse of the same rating must be used, Do not forget to refit the fuse cover In the event of losing the fuse cover, the plug must not to be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the p n face of the plug Fuse covers are available from any good electrical store.

• Fitting a different plug
• As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:
  
  • Brown cable = L (Live)
  • Blue cable = N (Neutral)
  • Green/yellow cable must be connected to ground (E) line
• With the alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Please call our UK based Customer Service department if you need help or advice from us:

United Kingdom and Northern Ireland: 0333 207 9710
Republic of Ireland: 01 862 3411
You can also contact us through our website: www.beko.co.uk