Emerson EMT-1200 User Manual page 13

Table of Contents

4- Once the copy is finish, 'copy finish' message appears, press repeatedly [RETURN] to back

to main menu, press [EJECT] button to sort out the CD.

The content of CD is saved temporary into the internal storage.

5- Place a new blank CD-R or CD-RW into DVD ROM and wait 15 seconds till the recorder reads

the CD, then follow the steps as below:

6- Once the burning is finished, the CD will be automatically ejected, press repeatedly [RETURN]

to back to main menu.

Note:

Content saved into internal storage can be burnt several times to different CDs

When you burn new files to internal storage, previous files will be covered.

IV. CDUSB/SD Card + USB/SD Card CD

This function allows users to

copy the content from a CD to a USB or SD card

copy the content from a CD to USB/SD card, then copy the content from USB/SD card

to a CD.

4.1 CD  USB or SD card

Before recording, make sure the capacity of USB or SD Card is bigger than the CD.

1- Prepare the CD to record and USB or SD card

2- Insert the CD into DVD-Rom and wait 15 seconds till the recorder reads the CD.

3- Plug the USB into USB port or insert the SD card to card slot, then follow the steps as shown

below

choose YES by pressing

[ENTER] button