Important Notice - Pioneer VSX-456 Operating Instructions Manual
Audio/ video stereo receiver
Hide thumbs
Also See for VSX-456:
- Operating instructions manual (28 pages) ,
- Service manual (72 pages)
Table of Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in
a safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings.
However the method of con-
necting and operating the unit is the same.
IMPORTANT NOTICE
[For U.S. model]
The serialnumber
for this equipmentis located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure place. This is for your
security.
THE POWER
SWITCH IS SECONDARY
CONNECTED
AND THEREFORE
DOES NOT SEPARATE THE UNIT
FROM MAINS POWER IN STANDBY POSITION.
TWO VOLTAGE SELECTOR SWITCHES
Only the multi-voltage model is provided with
these switches. Mains voltages in Saudi Ara-
bia are 127 V and 220 V only. Never use this
model with the 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel.
Check that they are set properly before plugging the power
cord into the household wall socket. If the voltage is not
properly set or if you move to an area here the voltage
requirements differ, adjust the selector switches as fol-
lows.
1. Use a medium-sized screwdriver.
2. First, insert the screwdriver in the groove of the volt-
age selector at the left, and adjust so that the tip of the
groove points to the voltage value of your area.
3. Next, insert the screwdriver in the groove of the volt-
age selector at the right and adjust until the voltage is
the same as at the left.
————
TWO VOLTAGE SELECTORS
110V
———
120-127V
Medium-sized screwdriver
2
U.S. mode!
NTSC
Multi-voltage model
PAL/NTSC
WARNING: to prevent FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RETURN function
This function returns the unit to its initial settings with
the tuner ready to receive a broadcast. This is helpful
during troubleshooting or when no sound is output.
For details, refer to page 25.
CHANNEL STEP SWITCH
(Multi-voltage model only)
The unit has been factory preset to the channel alloca-
tion value for the area in which it is to be sold. If this
value is set incorrectly, the tunes in frequency may be
wrong, or sound may be distorted, resulting in an inabil-
ity to reproduce reception signals at their proper sound
quality. For this reason, be sure to confirm that the val-
ues are set correctly before first using the unit.
(FM 100 kHz/AM 10 kHz) position:
Set to this position for areas with an FM reception step of
100 kHz and AM 10 kHz.
(FM 50 kHz/AM 9 kHz) position:
Set to this position, for areas with an FM reception step
of 50 kHz and AM 9 kHz.
NOTE:
When unsure about the channel allocation for your area,
consult your dealer for correct information.
AM
FM
9kHz
SOkHz
|
40kHz 100kHz
CHANNEL
STEP
Table of Contents
