Table of Contents
Using the Interactive Features
Follow the instructions in these sections to use your projector's interactive features.
Interactive Modes
Using the Interactive Pens
Using Finger Touch Interactivity
Using BrightLink with a Computer
Windows Pen Input and Ink Tools
Whiteboard Mode
Using BrightLink Without a Computer
Splitting the Projected Image with Whiteboard Mode
Sharing the Projected Screen
Using Interactive Features with Two Projectors (DuoLink)
Interactive Modes
The BrightLink interactive features turn any flat wall into an interactive whiteboard, either with or without
a computer. These interactive modes are available:
• In Whiteboard mode, you can use one or both interactive pens and up to 6 fingers to write on the
projected "whiteboard". You can split the screen and interact with the whiteboard and another
projected source. You can insert images from a USB drive or scanner and save, print, or email your
whiteboard pages without connecting a computer.
• In built-in Annotation mode (PC Free Annotation), you can annotate over content projected from a
computer, tablet, document camera, or other source. You can capture your annotated pages, and
save or print them. You can even split the screen and annotate on up to four images at the same time,
using one or both pens or your finger.
• In PC Interactive mode, you can use the interactive pen or your finger as a mouse to navigate, select,
and scroll through content from your computer. You can split the screen into four and interact with the
computer on one screen and annotate an image on the other three screens.
Note: A Touch Unit is optional for the BrightLink 1480Fi+ and must be installed for finger touch
operation.
Note: You can also use the Easy Interactive Tools software to provide additional interactive features,
such as saving your annotations and printing them. See the online Easy Interactive Tools Operation
Guide for detailed instructions.
208
Table of Contents
